1 / 17
CR Touch Mount, anti wheel collision
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Ender CR Touch Mount
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 380
- Makes
- 0
- Views
- 2,371
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
Ender CR Touch Mount
I have a CR-touch and I designed a mount for it.
The sensor can be adjusted a little bit in height (+ and - 3.5 mm from nominal).
Designed the position (left front) such that it can't collapse with the Y-wheel on the left, and no limitation of the X-range.
The sensor cable can be fixed with a tie-rap on the bracket.
Remove the M3 screws from the fan cover and place the mount over it and mount it with M3x10 (torx).
Firmware: Probe Offsets: (-41.591 , -19.74 , 0)
Check also my other designs: https://www.prusaprinters.org/social/201278-hans/prints