Dell USB-C Charger 65.0w AC Adapter Bracket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bracket for cliping the Dell USB-C Charger 65.0w adpater to walls and ceilings or under your desk.
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 24
- Makes
- 0
- Views
- 82
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution
I made this bracket to hold the Dell USB-C Charger 65.0 watt adapater (model number: LA65NM190 LPS) on the underside of a desk.
The bracket is best in PETG to give it a bit more flex then PLA so that you can clip in the adapater or you can also slide it in from the end. The fit is not tight nor loose. If you mount it so the adapater is vertical it could slide down the bracket, therefore horizontal mounting underside of a desk or cupboard is best for this bracket.
When the adapter is in the bracket, it can be slid back and forth, if you wanted to make the fit a bit more snug, you could perhaps scale it down by a faction of a percent. its less then 1mm clearance but enough that there is movement. This is by design to allow it to be able to be inserted from the top at an angle and ‘clip/snap into' the bracket.
The mounting hole is designed for a countersunk M4 self tapping screw. It will sit flush with the sufure of the bracket and not put pressure or force on the power adapter.