1 / 4
KARAK - věž na dlaždice / tile dispensing tower — image 1
1 / 4

KARAK - věž na dlaždice / tile dispensing tower

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Estimated printing price per file

€1.36 – €1.67 net (excluding VAT)

For file: Clean_top_0.2mm_PLA_MK3S_1h34m.gcode

This is an estimate for one file. You’ll confirm the exact price before ordering.

File and estimate settings

File used for this estimate

Average indicative estimate: €1.51 excluding VAT (range midpoint).

Weight reported by the author
18 g
Print time reported by the author
1.56 hr
Source material
PLA
Estimate material
PLA
Estimate printer
Bambu Lab P1S - 0.4 nozzle
Estimate process
0.20mm Standard

Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.

Saved on this device.

Výdejní věž na dlaždice do hry Karak / Tile dispensing tower for the game Karak.

Rating
5 / 5
Likes
24
Downloads
288
Makes
5
Views
758
Reviews
4

Updated at source:

Model information

Category
Board Games
License
Creative Commons — Attribution — Noncommercial — Share Alike

Výdejní věž na dlaždice hry Karak upravená tak, aby pasovala do mých insertů. Pojme všechny dlaždice včetně rozšíření Regent.

Víko lze zvolit:

  • jednobarevné bez draka
  • jednobarevné s drakem
  • dvobarevné s podbarveným drakem (stáhněte upravený tiskový soubor a na výzvu tiskárny vyměňte filament)

Tisknul jsem na MK3S+, 0.20 Quality, výplň 15%, PLA silver + galaxy black. Víko vyžaduje podpěry!

______________________________________________________________________________________________________________

Karak tile dispenser tower modified to fit my inserts. Can hold all tiles including the Regent expansion.

Lid can be chosen:

  • one color without dragon
  • one color with dragon
  • two color with under-colored dragon (download the modified print file and replace the filament when prompted by the printer)

I printed on MK3S+, 0.20 Quality, 15% infill, PLA silver + galaxy black.  Lid requires supports!
______________________________________________________________________________________________________________

Inserty vhodné pro tuto věž / Inserts suitable for this tower
https://www.printables.com/model/1251582-karak-1-vydani-1st-edition-insert-s-vezi-with-tile

https://www.printables.com/model/1252591-karak-2-vydani-2nd-edition-insert-s-vezi-with-tile

 

Tags