Deep Rock Galactic - Bosco Drone - Lifesize Prop for 3D Printing
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A life sized replica of the every dwarf's loyal robot companion, the APD-B317 APD. Or Bosco to his friends.
- Rating
- 0 / 5
- Likes
- 13
- Makes
- 0
- Views
- 290
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Props
- License
- Standard Digital File License
A life sized replica of the every dwarf's loyal robot companion, the APD-B317 APD. Or Bosco to his friends.
30cm/12in tall without the stand and 15cm/6in wide at the legs.
Can be printed in pieces in colour. Nothing needs supports, but it's recommended to print the leg axles horizontally for strength so they will need minor supports on the recessed area if so.
File with x2/x4 etc are the number of pieces needed.
The pieces are glued together and have a .2mm clearance which should be sufficient for any average printer.
Included are two .3mf files, one for Bambu Studio and one generic one for Prusa Slicer that collect the pieces into the colours they need to be printed in for the default paint scheme. It also rotates the pieces correctly, so I recommend using it for reference if you don't use either of those slicers.