Updated VzBot 3010 Fan Mount for Magneto Filament Cutter
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Upsized the air cooling from 2510 to 3010 fan
- Rating
- 5 / 5
- Likes
- 35
- Downloads
- 196
- Makes
- 1
- Views
- 675
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution
Feedback is welcomed in the comments. I am personally running the v3 version and it is working very well so far. With the 2510 duct from Github, I was getting some occasional clogs but not anymore.
I recommend printing it top down with a brim. You may also need to reduce your accels to prevent the print from getting knocked off the plate. And also it's best to use ABS, ASA, or PC for high-temp resistance.
Needs (4x) four M3x14 screws to attach your fan to it.
Please post your makes & comments!
Update 4/3/2025 - In the v1 file, I noticed that the area for the screw heads was not large enough, particularly if you wanted to use a washer. So I came up with version 2 which I think also has a little better air flow and smoother lines. Both versions are available in the files section.
Update 8/22/2025 - Realized that the back half that grips the cooling fins on the Goliath was a bit to tall. I reworked it to resolve that issue and also fine tuned the air flow path just a bit.
