Nooelec NESDR v5 Bracket
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A bracket that holds either 1, 4 or 8 Nooelec NESDR RTL-SDR Dongles.
- Rating
- 0 / 5
- Likes
- 9
- Downloads
- 101
- Makes
- 0
- Views
- 377
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Noncommercial
These brackets were made for the Nooelec NESDR Smart v5. The dongle is held via friction fit and has plenty of clearance for USB extension and SMA cables to attach. Includes openings on the sides of the dongles for air flow (I have a 120mm fan blowing on the side of mine). Most of the dongles I own are a good fit but I have one that is really tight so the might have changed the dimensions of the NESDR Smart v5 slightly over time. I included the STEP files if you need to adjust the opening for yours. You might want to start by printing the single dongle mount to test the fit. Each bracket has screw holes for mounting.
You shouldn't need any support material to print as most 3d printers should be capable of the bridging necessary.