Spool Holder For 8Kg Spool From ArianePlast
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
![FeedBack_M13 - [PSL3D.fr]](https://media.printables.com/media/auth/80120e98-536a-4651-9eaa-18c39f4dea7a.jpg)
8Kg Spool Holder for ArianePlast that allows up to 40mm3/s on a RatRig V-core 3.1/4 with Phaetus rapido hotend
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 18
- Makes
- 0
- Views
- 183
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
You will need 3 x M8 rods (≈250mm) and 6 x M8 nuts—I recommend using nyloc nuts for the bottom rods.
This spool holder is designed for quick swapping, so you don’t need to tighten the top rod at all.
However, the bottom rods must be securely tightened!
Simply use 4 x 608ZZ bearings (standard skateboard bearings), and you're good to go!
You can also install M6 PTFE connectors in two different orientations.
⚠ Make sure to use a short, tight, and low-tolerance PTFE tube, otherwise, the spool may roll too much, creating slack and potentially causing print irregularities.