Modular Laptop Rack
We calculate the final price from your selected file. You review and accept it before payment.
Preliminary estimate for PETG
€12.94 – €15.82 net (excluding VAT)
For file: laptop-rack_0.4n_0.2mm_PETG_MK4S_11h17m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €14.38 excluding VAT (range midpoint).
- Weight reported by the author
- 262 g
- Print time reported by the author
- 11.29 hr
- Source material
- PET
- Estimate material
- PETG
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Efficiently store multiple laptops on a storage shelf
- Rating
- 0 / 5
- Likes
- 251
- Downloads
- 935
- Makes
- 0
- Views
- 5,064
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
Modular storage solution for holding many laptops in upright position on a storage shelf. Great for IT department warehouse rooms.
One block has dividers for holding four laptops. Multiple blocks fit side by side to fill the whole shelf. Spacing of the dividers is parametric - you can have slim spacings (macbook air) to large spacings (thinkpad).
Assembly
The blocks have 2x holes at their bases for fitting a 3mm diameter brass or steel rod. This is meant to connect multiple blocks into one rigid form, and keep the individual blocks from tipping over or sliding in place. Slide in the rod, then fill both ends with adhesive to keep the rod in place.
For metal shelves or sliding surfaces - put either double-sided tape, or friction tape below the base of the block to keep it from sliding.
Printing
Recommended printing: 20% infill, PETG, smooth sheet (prevent warping during print), no supports (if your printer can handle the topmost arc connection overhang), add a brim for extra warping prevention during print.
Customize divider and laptop widths as desired (f3d file → User Parameters).