1 / 5
MINI+ Z Dammper Bottom — image 1
1 / 5

MINI+ Z Dammper Bottom

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Eliminate the loud squeaky noise from the Z-axis whenever your printer auto homes or starts/finishes a print job.

Rating
0 / 5
Likes
3
Downloads
12
Makes
0
Views
60
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution

Have you ever experienced a loud, squeaky noise when your MINI/+ Prusa printer performs auto home or when the X-axis moves up or down?

This issue is often caused by misalignment in the Z-axis assembly. It can sometimes be solved by adjusting the screws that hold the top Z motor or even the entire Z motor mount on the extrusion. However, in some cases, this isn't enough.

I personally tried reassembling the Z-axis, but the noise persisted. It turns out the Z leadscrew was making contact with the bottom part of the Z-axis plate.

This Z damper, inspired by the Z-top housing of the Prusa XL, is designed to eliminate that annoying squeaky sound once and for all.

You can print it in PLA, PETG, or even more technical filaments — whatever works best for your setup.

Just use the default "Structural Part" profile in PrusaSlicer and you'll be good to go. 🙂

Let me know if it worked for your printer!

Tags