1 / 5
MINI+ Z Dammper Bottom — zdjęcie 1
1 / 5

MINI+ Z Dammper Bottom

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Eliminate the loud squeaky noise from the Z-axis whenever your printer auto homes or starts/finishes a print job.

Ocena
0 / 5
Polubienia
3
Pobrania
12
Wydruki
0
Wyświetlenia
60
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Licencja
Creative Commons — Attribution

Have you ever experienced a loud, squeaky noise when your MINI/+ Prusa printer performs auto home or when the X-axis moves up or down?

This issue is often caused by misalignment in the Z-axis assembly. It can sometimes be solved by adjusting the screws that hold the top Z motor or even the entire Z motor mount on the extrusion. However, in some cases, this isn't enough.

I personally tried reassembling the Z-axis, but the noise persisted. It turns out the Z leadscrew was making contact with the bottom part of the Z-axis plate.

This Z damper, inspired by the Z-top housing of the Prusa XL, is designed to eliminate that annoying squeaky sound once and for all.

You can print it in PLA, PETG, or even more technical filaments — whatever works best for your setup.

Just use the default "Structural Part" profile in PrusaSlicer and you'll be good to go. 🙂

Let me know if it worked for your printer!

Tagi