Obtuse Mag Holder VX22
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Holds a mag, at an angle. Designed for the Taurus TX22. Mag release is ambidextrous.
- Rating
- 5 / 5
- Likes
- 28
- Downloads
- 667
- Makes
- 3
- Views
- 2,303
- Reviews
- 3
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor Sports
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
See Zip file for all files including STL & STEP.
---Citations:
Inspired by the Recovery Tactical MG9 Angled Mag Pouch.
---Description:
Holds a mag, at an angle.
Designed for the Taurus TX22.
Mag release is ambidextrous.
---Variants:
A: Standard mag holder.
B: I flared the top of the mag holder to act as a finger stop, to keep fingers away from barrels.
---Hardware:
1x M4x30mm bolt & nut
1x Glock Magazine Catch Spring (37.5mm x 0.055"/1.3mm piano wire)
---Printed Parts:
Print both parts of A or B and one Mag Rel.
---Print Settings:
+30% gyroid infill
6 walls
5 top & bottom
supports on
*these are only recommendations
**I have pre-oriented all of the parts to what I think will give you the best results, but you know your printer best.
---Assembly:
Insert Mag Rel, with the ribbed side going in first.
Once inserted all the way, install Glock mag catch spring.
M4x30mm is for mounting picatinny Clamp piece.
--Excetera:
I have included a fuzz skin modifier if you want to use it.