1 / 8
Power brick Ac-adaptor mounting bracket
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
This mounting bracket can be used on most flat surfaces with many types of Power brick adaptors
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 19
- Makes
- 1
- Views
- 138
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution — Share Alike
This mounting bracket can be used on most flat surfaces with many types of Power brick adaptors
I am using mine on a shelf in my server rack.
Materials:
- A heat resistant filament. (like PLA+ or PETG)
- Double-sided tape. (The stronger, the better)
- Zip Ties or velcro strips. (To fasten the adaptor to the bracket)
Assembly and installation:
- Print the bracket and remove its supports
- Tie your Zip Ties or velcro strips to the long holes on the side, as shown in the pictures.
- Add your adaptor and fasten it to the bracket. Make sure the power cable is pointing up.
- Add the double-sided tape to the bracket, as seen in the pictures.
- Place the bracket on a flat surface.