1 / 8
Power brick Ac-adaptor mounting bracket
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
This mounting bracket can be used on most flat surfaces with many types of Power brick adaptors
- Ocena
- 0 / 5
- Polubienia
- 2
- Pobrania
- 19
- Wydruki
- 1
- Wyświetlenia
- 138
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Electronics
- Licencja
- Creative Commons — Attribution — Share Alike
This mounting bracket can be used on most flat surfaces with many types of Power brick adaptors
I am using mine on a shelf in my server rack.
Materials:
- A heat resistant filament. (like PLA+ or PETG)
- Double-sided tape. (The stronger, the better)
- Zip Ties or velcro strips. (To fasten the adaptor to the bracket)
Assembly and installation:
- Print the bracket and remove its supports
- Tie your Zip Ties or velcro strips to the long holes on the side, as shown in the pictures.
- Add your adaptor and fasten it to the bracket. Make sure the power cable is pointing up.
- Add the double-sided tape to the bracket, as seen in the pictures.
- Place the bracket on a flat surface.