1 / 2
The Traitors Shield
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A model of the shield from the BBC show "The Traitors"
- Rating
- 0 / 5
- Likes
- 14
- Downloads
- 467
- Makes
- 2
- Views
- 1,771
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Art & Designs
- License
- Creative Commons — Attribution — Noncommercial
My take on the shield as shown in the BBC show “The Traitors”. Has a hole at the top for threading some string to. The details on the inside of the shield prints separately, requiring it to be superglued into the shield.
The holes are for half-sphere pearls to be inserted / superglued in, of the following quantities and diameters:
- 14x 3mm
- 17x 4mm
- 1x 5mm
To print:
- Model optimised for 0.6mm nozzle diameter, but 0.4 should still work (untested).
- 0.2mm layer height
Specs:
- Width: 5.5cm
- Height: 8.2cm
- Depth: 0.5cm
Shield printed in Prusament Oh My Gold, and the inside details in GEEETECH Black.
Pearls I used were purchased from Amazon: https://www.amazon.co.uk/dp/B0822MN4FV