Counting matching models…
Gamer case for your BBC Micro Bit Features: Easy to print Easy to handle Allows access to all the board features You can attach the battery box in the back. https://www.prusaprinters.org/prints/20132-case-for-bbc-microbit Print…
This is a controller shaped case for the BBC Microbit with a detachable battery holder that fits the standard 2xAAA (JST-PH) battery pack for the Microbit. The original design for the controller case was done by Guillermo Melantoni…
It's my “quick and dirty” Tinkercad remix of the great original design by rayjizza: https://www.printables.com/model/20112-gamer-case-for-bbc-microbit The case is now compatible with BBC micro:bit v2 (and v1 as well). The layout of…
You can fit the MicroBit Board alone or the "GAMER case for BBC MICROBIT" Download it here: https://www.prusaprinters.org/prints/20112-gamer-case-for-bbc-microbit It also has compartiments for: USB Cable Battery Print instructions No…
I have created multipurpose battery pack holder for BBC microbit. I have spent lots of time perfecting it. It can stand on its own, be clipped on lanyard or with use of velcro strap used as wearable. Now i am releasing it out in the wild.…
I have created multipurpose battery pack holder for BBC microbit. I have spent lots of time perfecting it. It can stand on its own, be clipped on lanyard or with use of velcro strap used as wearable. Now i am releasing it out in the wild.…
This is a remix of Jubaz's micro:bit V1 case, specifically updated to provide full compatibility with the micro:bit V2 . While the V1 and V2 share the same footprint, the V2's internal component shifts and new hardware features required a…
My spouse, a saint of patience and robotics education, teaches a class of nearly thirty middle schoolers the wonders of circuits and coding. With that many bright young minds (and hands!) eager to tinker, her classroom was starting to…
Game controller for BBC Microbit. Needs some more work.
Stand for micro bit in flower pot. Outer diameter for pipe 8 mm.
A simple way to connect a trailer to your BBC microbit car
Video of it in action https://docs.google.com/presentation/d/1tPr8-Wlly2cKCD7v7oQrFnrQZWnOcuxOu6znksW3VAs/edit?usp=sharing Also, sadly, you can only do one letter at a time. I tried to do multiple, but the CPU went from cold to blistering…
My spouse, a saint of patience and robotics education, teaches a class of nearly thirty middle schoolers the wonders of circuits and coding. With that many bright young minds (and hands!) eager to tinker, her classroom was starting to…
Video of it in action https://docs.google.com/presentation/d/1tPr8-Wlly2cKCD7v7oQrFnrQZWnOcuxOu6znksW3VAs/edit?usp=sharing Also, sadly, you can only do one letter at a time. I tried to do multiple, but the CPU went from cold to blistering…
This is a remix of Jubaz's micro:bit V1 case, specifically updated to provide full compatibility with the micro:bit V2 . While the V1 and V2 share the same footprint, the V2's internal component shifts and new hardware features required a…
This is a replacement latch for the bussing bar connector on something very similar to an Eaton BBC-MCS2 cover. It may suit other applications. The original was injection molded from PA66, GF30, 30% glass filled Nylon, I have printed mine…
Le lancement de fusées à eau est une activité ludique, mais elle peut être dangereuse sans un minimum de précautions. L'utilisation d'une base sécurisée est donc nécessaire. En voici réalisable avec notre imprimante 3D La retenue et…
Printed on my Anycubic Kobra 3. Once loaded into slicer, just paint as required! No supports needed See my profile for other bar signs for your mancave!
Excalibur (from BBC's Merlin) The Excalibur from BBC's Merlin series, perfect for your costumes or figurines. - Printing characteristics : Print: 0.2-0.3mm Nozzle: 0.4mm Perimeters: 3 Support: No r equired Brim: Not required Infill: 15-30%
Simple keyboard dust cover/cap for the BBC Model B, just slots snuggly over the keys. I've added a couple of logos which can be added to the print if you have a multi-coloured printer. This print requires a large print bed of at least…
Simple keyboard dust cover/cap for the BBC Master Computer, just slots snuggly over the keys. I've added a couple of logos which can be added to the print if you have a multi-coloured printer. This print requires a large print bed of at…
This grid is designed to shield each LED element on the “ Kitronik ZIP Tile for BBC microbit ” Since components like capacitors are placed between the LEDs on this ZIP Tile, the grid is modeled to avoid them. This allows the grid to fit…
Inspired from some perpetual calender models. (https://makerworld.com/fr/models/115260-date-keeper-perpetual-flip-calendar) Finally i found a way to make a compact counter with big figures, with a reliable mechanics (gravity never fails).…
A duplicate of the original plastic surround that fits a BBC Master around the front cartridge slots and holds the internal speaker. It should be a good fit and almost identical to the original, but ready to be remixed for your needs…
This is a replacement rear screw clip for the BBC Micro. The screw hole is larger on one side than other, with the large hole facing outwards from the case. The smaller hole is intended for the screw to bite on the first time it's…
BBC Micro:Bit case for holding/protecting your Micro:Bit. Holes fit m3 bolt. Compatible with v1 and v2. This works with any filament. I use the normal pla by elegoo, but only because its the cheapest.
You can fill the pits with a different material/paint for a more interesting look. Category: Models
This is a no-glue model of the BBC Micro, a microcomputer designed and built by Acorn Computers in the 1980s, very common in the UK. Like it? Please visit our shop at https://www.etsy.com/it/shop/MicroComputersMuseum Print instructions:…
***NOTE: This is a WORK IN PROGRESS with credit to the original designer -M6YPA. Files, instructions, Pictures, descriptions and other stuff might change! ***UPDATE-20180216-February 16,2018: I have updated and printed out the new Bitx-40…
Hi all, This is origanaly uploaded for a competition for 3D printer hosted on My Mini Factory. https://www.myminifactory.com/pages/bbcmicrobit The Case.stl can be printed without support and must be done on its back- with the walls up The…
Micro:bit case for the second version of the board Supports the new features of the card: - microphone - speaker - Touch logo Remixed from https://www.thingiverse.com/thing:3028078 and https://www.thingiverse.com/thing:3511591
L'articulation au niveau du tirant a été améliorée par une rotule. Bientôt une version BBC23 avec meilleure cinematique et tous, je l'espère, les composants en impression 3d
Le lancement de fusées à eau est une activité ludique, mais elle peut être dangereuse sans un minimum de précautions. L'utilisation d'une base sécurisée est donc nécessaire. En voici une réalisable avec notre imprimante 3D La retenue et…
This tap handle has a printed thread and the face is flat so you can either change the logo up, or do a filament swap for the logo. I print this with tree supports and monononic ironing. black/white is 0.16 layer height grey/gold is .02…
Case for Raspberry Pi 3A+ with BBC Micro Coprocessor Tube Hat giving full access to all the 3A+ ports and the top 40pin connector of the IO hat. Also has a BBC Micro logo on top and a larger logo on the bottom doubling as an air vent.…
Simple case for the Monster Joystick Retro Joystick BBC Micro / Electron Adapter. Case needs gluing together. Also included a no logo version *Originally from my Thingiverse listing and printed on my Anycubic i3 Mega, photos are from that…
Very useful stand for prototyping with BBC micro:bit. You can can add your microbit, sensors or other external items. Printing without support.Infill 30%, walls 3 layers.
SUG-BBC (Big Black Case): Sub-21L DIY 3D Printed PC Case that fits full size ATX components. This case can accommodate high-end gaming components for maximum FPS and cooling. Designed for water-cooling with high-wattage Intel or AMD CPU's…
Mount for expansion board for BBC micro:bit IoT - ElecFreaks EF03426. Wi-fi module for BBC micro. Printing without support.
BBC Micro logo - OpenScad Script. May be rescaled logo may be embossed or debossed. When debossed, the card is perforated and a colored card may be inserted in the back to set the logo color. For this mode a frame is also printed and must…
I liked fablabbcn 3d printed rose but I wanted to attach a stem to it. I designed this stem to be about 5 inches long and the size of the rose. I like how the stem comes out a bit rough. It makes it look a little more natural than 3D…
This is robot car build on REKA:BIT (micro:bit Expansion Board). NOTE: This is still work in progress. ROBOT CAR code: https://makecode.microbit.org/52661-84220-16393-71146 Rekabit library:…
Toutes les pièces imprimables sont ici, mais pour les détails de montage voir sur mon site : http://fusees.free.fr/base%20bouchon%20compressible.htm#BBC21
Requires: 1x BBC Micro:Bit v2 (https://amzn.to/3WLQaFP) 1x Keyestudio breakout board (https://amzn.to/4ddqSpl) 1x 128x64px I2C Oled screen (https://amzn.to/3WBxPuY) 1x PS2 Joystick (https://amzn.to/3SnfmzP) Some Female to Female jumper…
Robot Description This robot is a simple project, perfect for beginners. To assemble it, you will need the following components: 2x DC motor with gearbox – for driving the robot. 2x robot wheels for DC motor – wheels to attach to the…
