M5Stand Dial Stand Extender
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Makes you stand taller so there is more room for USB cable underneath of it.
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 19
- Makes
- 0
- Views
- 183
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
After I printed original stack I found the same issue as some other reviewers - some USB cables do not bent so well so the stand does not stand. I had some iterations on the extender with screw / spring versions, but found all of them overengineering. The part I post here is just equivalent of the bottom portion so you can easily “add” it to the original stand in orca slicer so it will be single unit.
On photos you see some of my older iterations, don't waste time on printing attachments - if you need more room for the cable combine the stand and extender (or several of them) together and print as a single unit.
In Orca Slicer it fantastically easy to do - go to “objects” on the left, select your stand, right click → add part → Load - load the extender, then click “move” for the stand in the right section, hold Z access arrow and lift your model up.