1 / 4
Remix of Guard Plates
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Remix of Guard plates C1, C2, D1, and D2 to add magnets. Remix B front guard to allow running on textured build plate.
- Rating
- 5 / 5
- Likes
- 87
- Downloads
- 1,173
- Makes
- 8
- Views
- 5,893
- Reviews
- 5
Updated at source:
Model information
- Source
- Printables
- Category
- Other Printer Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Guard plates for C1, C2, D1 and D2 printed face down and when completed installed a 5x2 mm magnet. I printed in PETG but original files are for PLA. Either will work.
Gurad Plates B1 Front and B2 Front were split in 2 pieces so the main plate could be printed face down on a textured plate. The second piece is the riser for mounting the hinges. The pin is a snug fit and can be glued in place but I did not because the parts are held together by the bolts used for the hinges.