Music folder handle
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€0.95 – €1.16 net (excluding VAT)
For file: x6-dovetail-end-holder-velcro_0.4n_0.2mm_PLA_MINIIS_50m.bgcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €1.06 excluding VAT (range midpoint).
- Weight reported by the author
- 18 g
- Print time reported by the author
- 49.8 min
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Two of these end pieces along with some velcro strap add a handle to my sheet music holder.
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 10
- Makes
- 0
- Views
- 101
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Music
- License
- Creative Commons — Attribution
This is a velcro handle for a choral folder.
Print two of these dovetail end pieces which feature a slot for ¾ inch wide velcro strap. You will need 25 inches of the Velcro One-Wrap or a similar product.
I purchased this velcro wrap on Amazon.
I printed the pieces using PLA, 15% fill, 0.2 mm / layer. You will need supports between the base and the dovetail. I used organic supports which come off fairly easily with a putty knife.
These end pieces fit in my Choral sheet music holder
Lay the velcro - furry side against the folder and the two end pieces (dovetail-end-holder-velcro) at either end as shown.