Chain Link Double or Single Gate Fork Latch 1-3/8 Inch
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Print-a-Latch instead of Buy-A-Latch
- Rating
- 0 / 5
- Likes
- 18
- Downloads
- 76
- Makes
- 0
- Views
- 484
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Outdoor & Garden
- License
- Creative Commons — Public Domain
I printed mine in Bambu Labs PA6-CF. It was sitting around unused. Plus, I wanted the latch to last. Seemed fitting.
Don't use PLA.
Get some Rapid PETG from Amazon, at least. There are a few brands that have PETG, that prints similar to PLA at high speeds.
If you have a double gate like mine, I included a handle to use on the secondary gate's bar. Measure the bar first, to see if it is 18mm. Or whatever 18mm is in inches.
Holes are 6mm. I used 5mm bolts and nuts.
I hated the latch on my double gate.. well, gate. So I made a replacement handle for the secondary gate. Then instead of waiting for a new latch to be delivered. I modeled one to print it.
The bracket will work on 1 and 3/8 inch fence posts. The fork itself is over sized, so I wouldn't have to make different sizes for that. It still keeps my gate closed with no issues.
I will model more brackets for different size fence posts soon.