Chain Link Double or Single Gate Fork Latch 1-3/8 Inch
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Print-a-Latch instead of Buy-A-Latch
- Ocena
- 0 / 5
- Polubienia
- 18
- Pobrania
- 75
- Wydruki
- 0
- Wyświetlenia
- 480
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Outdoor & Garden
- Licencja
- Creative Commons — Public Domain
I printed mine in Bambu Labs PA6-CF. It was sitting around unused. Plus, I wanted the latch to last. Seemed fitting.
Don't use PLA.
Get some Rapid PETG from Amazon, at least. There are a few brands that have PETG, that prints similar to PLA at high speeds.
If you have a double gate like mine, I included a handle to use on the secondary gate's bar. Measure the bar first, to see if it is 18mm. Or whatever 18mm is in inches.
Holes are 6mm. I used 5mm bolts and nuts.
I hated the latch on my double gate.. well, gate. So I made a replacement handle for the secondary gate. Then instead of waiting for a new latch to be delivered. I modeled one to print it.
The bracket will work on 1 and 3/8 inch fence posts. The fork itself is over sized, so I wouldn't have to make different sizes for that. It still keeps my gate closed with no issues.
I will model more brackets for different size fence posts soon.