Logitech K800 Inner Key clip/hinge
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement inner clip for Logitech K800 keyboard.Best printed by PLA; PETG is slightly worse. I printed it on Prusa…
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 36
- Makes
- 0
- Views
- 176
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Ideas
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Replacement inner clip for Logitech K800 keyboard.
Best printed by PLA; PETG is slightly worse. I printed it on Prusa mk2 FDM printer with 0.4mm nozzle, but it requires a lot of postprocessing with a knife, especially the lower part. It would be much better with 0.2mm nozzle, unfortunately I don't have one and I was in a hurry to fix my keyboard. SLA would be probably best option. Use the smallest layer height as possible, I used 0.1mm.
It's quite difficult to print because of small pins, I used support without any contact distance and then I removed the supports with a knife. It might be better with a smaller nozzle, I'll see when another key will break. Definitely you need to adjust it a little bit by small knife. I didn't do any more postprocessing.
Print Settings
Printer Brand:
Prusa
Printer:
i3 MK2S
No
Supports:
Yes
0.1mm
Infill:
100%
You need to do fine adjustments with a knife.
Category: Parts