Raspberry Pi Bumper Case in TPU with Easy to Remove Supports
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Quick print bumper flexible case that fits around a Raspberry Pi 5, 4, 3+, and 3. Easy to remove Supports!
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 28
- Makes
- 1
- Views
- 202
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution — Noncommercial
Quick TPU/Flex bumper case for a Raspberry Pi. Tested with a Raspberry Pi model B 4 and 5; should fit 3 and 3+. The top is open for airflow. All ports and GPIO pins are accessible. Works with active cooler.
Print the 2 Supports in PLA or a hard material before printing the bumper.
When printing the bumper, add 2 pauses (or use included 3mf): one at the top of the cutout for the SD card and one at the top of the main board (blue and gray in the picture, respectively). The pauses are 1 layer before the overhang. Quickly pop in the appropriate support, and hit continue. Inserting the 2 support objects mean that you don't have to generate supports in TPU and the support objects can be easily removed once the print is complete.
I used a 0.2mm layer height, White Overture FLEX. A silk textured build plate may help with removing the TPU (optional).