1 / 2
Milling guide for Proxxon IBS-E
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Guide for Proxxon Micromot devices (20mm collar) to help when milling slots.
- Rating
- 0 / 5
- Likes
- 7
- Downloads
- 39
- Makes
- 0
- Views
- 195
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
I wanted to mill a cutout into one of the panels of my Original Prusa Enclosure but milling it without a guide produces very bad results.
I designed this attachment to clamp onto my Proxxon IBS-E as a requirement to be used with the MillingGuide from my PTFE Passthrough for Original Prusa Enclosure MMU3 XL model.
Changelog:
- 2025-04-12: Uploaded first public R1 revision of this model.
Additional Hardware you need:
- 1 x M3 nuts
- 1 x M3x8 socket head cap screws, 8mm is the minimum length
Printing
- Material: PETG
- Nozzle: 0.4mm
- Layer Height: 0.2mm
- Perimeters: 2
- Infill: 15% Gyroid
- Supports: Not needed