295 models
Austausch-Gleitschiene für den Winkelanschlag der Proxxon FET, um das übermäßige Spiel zu reduzieren. Benötigt wird neben dem 3D-Druckteil noch eine 24mm lange Gewindestange M4 für den Feststeller. Ich habe in die Bohrung vorab Gewinde…
Print approx. €1.48–€1.81 excl. taxPreliminary estimate for PETGSource material: PET
EN: It was one of my first tinkerings for my Proxxon machines and I had downloaded the print files from Thingiverse at the time. What bothered me, however, was that you had to unscrew the cap nut on the drill head on the machine to expose…
Print approx. €9.34–€11.41 excl. taxPreliminary estimate for one variant
Theses are gauges for easily set the support at usual angles. Make sure your printer is on the corner ! Print Settings Printer: Any Rafts: No Supports: No Resolution: 0,2mm Infill: 25% Notes: Verry simple to print. Make sure your printer…
Print approx. €0.57–€0.69 excl. taxPreliminary estimate for one variant
The Proxxon Micromot came with a collet holder but it was not suitable to fit on the drill stand mb200. Therefore I designed this simple holder which you can put on the main pole of the stand. Might fit on other poles as well as long as…
Print approx. €0.74–€0.91 excl. taxPreliminary estimate for one variant
Proxxon replacement for a broken part for stand mb 140/s using sk20 (Sk20 20Mm Bore Linear Rail Shaft Support Rod Bracket L8J1) https://tinyurl.com/y9t7u7bu Print instructions Category: DIY Print Settings Printer Brand: Prusa Printer: i3…
Print approx. €1.29–€1.57 excl. taxPreliminary estimate for PETGSource material: PET
With this clamp, Proxxon and all other tools with a maximum diameter of 35 mm and a clamping diameter of 20 mm can be clamped in vices and with an additional clamp on the table. An M5x30 bolt and an M5 nut are also required. Link for an…
Print approx. €3.80–€4.65 excl. taxPreliminary estimate for PETGSource material: PET
𝐔𝐏𝐃: I am currently working on a version that uses 𝐚𝐜𝐭𝐢𝐯𝐚𝐭𝐞𝐝 𝐜𝐚𝐫𝐛𝐨𝐧 𝐩𝐞𝐥𝐥𝐞𝐭𝐬 to reduce the toxins of the solder fumes which I will release 𝐒𝐎𝐎𝐍! I solder a lot on my Proxxon FMZ so I decided to create a simple fume extractor that attaches…
Print approx. €0.99–€1.21 excl. taxPreliminary estimate for one variant
Welcome, and thank you for choosing my model. I will provide some context for this model. This custom-made storage box is specially designed for Proxxon saw blades with a diameter of 50 mm. The box is 3D-printed and equipped with a…
Print approx. €3.98–€4.87 excl. taxPreliminary estimate for one variant
EN : The brilliant box for the Proxxon ratchet by MasterDisaster is missing one thing: a lid. I took the liberty of designing one. Two versions: one with text and one without. For the version with text, there is a gcode file that is set…
Print approx. €1.99–€2.44 excl. taxPreliminary estimate for one variant
This set of easy to print parts makes a nice and well working router out of your Proxxon multi tool. It should fit for all similar tools that have a 20mm diameter metal clamping base. The height of the router bit tip vs. the base plate…
Works great, 60 mm wide. Print instructions When assembling turn nut M6L counter-clockwise.
Description Proxxon combination wrench holder including versions for both Küpper and Skadis Pegboards. In order to save space the wrenches are placed sideways. Each wrench size is displayed to the left of the wrench. Available models…
Sometimes it is practical to use the ProXXon IBS/E to cut thin pipes or rods. And it would be nice if this could also happen at an angle of 90 °. So I did a remix of the cool tool published by GreaseMonkey88 to cut small diameter rods or…
Router base for proxxon dremel (Proxxon Feinbohrschleifer FBS 240/E). Will fit other dremels with a 20mm diameter for attachments. Uses a M4 screw and nut to secure the dremel. I still recommend to also grab the dremel during use and not…
This is an older project I have finally got round to uploading! A drill press stand designed to fit the Proxxon Micromot 60E/F. It also gave me a chance to try out my laser cutter at the time. Unfortunately there isn't much in the way of…
I needed to cut holes for speakers but also to carve notch for speaker edge to fit in. As I did not have proper tool for that job I had to make it on my own. As I already had cutting guide adapter for my Proxxon grinder I decided to make…
Wall holder for 15 combination wrenches (6mm to 21mm). Numbers indicate the wrench width, suggested to print in separate color. The Proxxon SlimLine kit fits perfectly. Includes three mounting holes (4mm Spax). I printed with a 0.25mm…
I wanted to build a cheap and accurate CNC mill, to engrave and drill simple PCB boards. The build is using easy to get components (mostly 3D printer parts), and some printed parts. The plan was also not to make any irreversible changes…
Inspired by the multi corner cutter offered by https://www.shiftinglands.com/ I decided to make something similar for myself. I also added a circle shape that allows me to cut circles as well. Some assembly and non 3D-printer work is…
Fully 3D printed table saw sled for the mini Proxxon KS 230. Parts: Sled Runner Guide Nut Railnut Lever Stop Fasteners (not 3D printed :-) 1x M3x20 socket head (fully threaded) 1x M4x25 socket head 2x M3 hex nut 1x M4 hex locknut The…
Print laying flat using supports for best strength along the tool, see example slicer picture. Printed in PETG, 4+ Walls.
Different tools for the Proxxon PS13, best printed in resin, not sure about FDM. I use 3M 2-5-468MP doublesided tape to stick regular dry and wet sandpaper on the tools. For the round one I use round die punches and for the triangle I use…
Fence for Proxxon MBS 240 I printed it in PETG, but a stiffer filament is recomended. Uses a M5 Heatinsert and a M5x30 Screw with an 8mm Hex Head.
Diese Schärfvorrichtung habe ich in einem Video eines sehr geschätzten Youtubers gesehen, den er von einer ebenfalls sehr geschätzten Firma hat. Hier ist meine Variation davon mit fixem Winkel zum Hinterschliff des Freiwinkels. Ihr könnt…
This tool is a auxiliary tool for grinding drills with a proxxon TSG 250/E plate grinding machine. The tool is inserted into the rail so that the angle matches the drill. For easier printing, the template is divided into two parts
Simple design to hold a Proxxon Micromot 60 rotary tool. It holds the 12V power supply adapter and all accessories which come with the “ Model building and engraving set with Micromot drill/grinder 60/E ”. The collets holder can be slid…
A handy adjustable distance rail for parallel cutting with the Proxxon Micromot 60 rotary tool. It might also fit other rotary tools from them but you'd need to check yourself. Nevermind the long bolts in the photos, I was still waiting…
Couldn't find this part available, so I made one. It makes the Dremel Press compatible with multi-tools with a 20mm neck like the Proxxon FBS 240/E, without losing any functionality. It holds the tool centered, as the original Dremel one.…
PCB Cutting table for Proxxon Micromot drills with a 20mm neck. Very useful mini cutting table can use to cut PCB boards. The table can be connected to a vacuum cleaner. Use a 40mm diamond disc for cutting The model consists of 3 parts,…
Combo Wrench Holder Pegboard 15mm grid (screw version) (e.g. Proxxon Set) I adapted it to a 15mm Pegboard grid with 6.5mm holes for 6mm screws. I cut 6mm threads into the 5mm holes to use 6mm metric screws.
Simple Wrench Hanger for Honeycomb Storage Wall (HSW). Designed to securely hold wrench sizes 6-19. The hex holders are arranged thoughtfully so the two files align seamlessly when placed next to each other on the wall. Why I designed…
This is a small threaded adapter that makes the Dremel 8220 rotary tool fit into the Proxxon MB 200 drill stand (after removing the Dremel’s EZ Twist cap). Modeled in Autodesk Fusion 360 and printed on a Formlabs Form 1 . You can view the…
super small and adjustable table saw for straight cutting, with slots on the table for additional jigs height and width adjustable from 0mm up to more than 45mm if you slide the disk mandrel out just two m3 screws needed, you may need to…
Einlage für einen älteren Proxxon Ratschenkasten. Die Einlage besteht aus 3 Teilen um auch auf kleineren Druckern gedruckt werden zu können. Maße (alle 3 Teile zusammen): 430mm x 172mm x 46mm. In meinem Beispiel mit PLA gedruckt.
Die Minidrehmaschine Hobbymat MD65 (baugleich Proxxon SD300) hat keine Schloßmutter an der Z-Achse, sondern nur eine durchgehende Leitspindel mit 1mm Steigung. Um den Support zu verfahren muss ordentlich gekurbelt werden - das ist mit dem…
Gridfinity storage for Proxxon grinding and polishing tools Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: .3 Infill: 20% Filament: eSun PLA Category: Tool Holders & Boxes
Black Tools are original, transparent are printed with resin by me (you'll find the tools in my profile) Printed and tested in ABS (Nobufil ABSx Galaxy Blue), so your mileage may vary. I added a test piece with a single holder for you to…
Backen für den kleinen Proxxon Micromot Schraubstock MS4 auf'nem CR10S V2 DD gedruckt 100% Infill für den Rundstab mit den Backen nach oben und Stützstruktur
Simple holder for Proxxon collets and chuck based on templates by Zack Freedman.
Printed 100% in PETG
Clamping jaws for the Proxxon FMS75 precision mechanics vice for clamping round material. There are jaws for round material with a diameter from 4 mm to 12 mm in 0.5 mm steps. Other diameters between 4 and 12 mm can be created with…
Inspiriert durch die Indexscheibe von Tony_G ( https://www.thingiverse.com/thing:726758 ) habe ich für meine Minidrehmaschine Hobbymat MD65 (baugleich mit Proxxon SD300) eine Indexscheibe mit 5 Grad-Einteilung konstruiert. Damit kann ich…
A 1x6 gridfinity storage for Proxxon Micromot 60E Edit 2024-08-06: Uploaded correct version of the .3mf file
This models can be printed in TPU and used with Proxxon Vice to better keep fragile object. Available flat or with aligned 45 degree cut. Buy me a coffee if you want to support me!
All parts are designed for M5 screws.
PCB Cutting table for Proxxon Micromot drills with a 20mm neck. Thi is variation of my mini cutting table Very useful mini cutting table can use to cut PCB boards. The table can not be connected to a vacuum cleaner. Use a 40mm diamond…
not a real remix but strongly inspired i have designed an adapter for a green adjustable soldering iron with which it can be used in the MICROMOT drill stand MB 200 as a press for heat set inserts. The soldering iron is available from…
Support pour outils et accessoires pour mini tour Proxxon PD250 Les supports d'outils et accessoires sont fixé à l'extérieur du bac récupérateur
Two Jigs for cutting a circle in light material (PC, wood …) There ar two jigs, one for the diameters of 50-160mm (in 10mm increments) and the second one from 55-165mm (in 10mm increments). Use a 2mm milling cutter , with 3mm you have to…
------------------------------------------------Deutsch------------------------------------------------- Universalgleiter für Nut der Proxxon FET 27070 Version 1.0 Initial Version der Nutgleiter Kommerzielle Nutzung: Dieses Model ist für…
This stop fits the Proxxon KS 230 mini table saw. It allows repeatable cuts with the fence. A M4x20 hex screw and a M4 heat set insert are needed for the thumb screw. Printed with PLA, 0.3 mm layer height. The knob is pre-bridged, no…
A mount for my Proxxon rotary tool, and a few simple fixtures to go with it. More photos and complete article here: http://keveney.com/posts/rotary-tool-fixtures/
prints without supports (print orientation as shown in pictures) 250x200 minimum buildplate size. layer height: 0.25 or 0.2 walls: 2 I used 10% infill
Proxxon Micromot to small "hobby" lathe mounts. Only for plastic or aluminium works! (Toolpost version is for 60 x 60 mm toolpost.) Print Settings Printer: Molestock Rafts: No Supports: No Resolution: 0.2mm Infill: 80% octagonal Notes:…
Previous versions were really loud because of the straight bevel gears, using spiral bevel gears design the noise is reduce significantly. See Video: This version also uses a bigger main shaft bearing, with a more precise assembly method…
A custom made Gridfinity holder for the ratchet wrench and sockets out of my Proxxon ratchet wrench set as seen in the second image. Measurements: Length: 168mm (4 Gridfinity units) Width: 84mm (2 Gridfinity units) Height: 38mm (5…
Small stop for the Proxxon table saw KS230 lateral fence. Intended for repeatable rip cuts with the mitre fence. It needs an M3 thumb screw and an M3 heat insert. Printed with PLA, 0.3 mm layer height and variabel layer heights.
PROXXON 28500-76 redukční kroužek pro brusky Micromot
Drill bit sharpener base for proxxon dremel (Proxxon Feinbohrschleifer FBS 240/E). Will fit other dremels with a 20mm diameter for attachments. Use the drill holder from the original model
This is the base fixture. Additional custom made parts can be mounted on this base fixture. On the side, you can insert 2 M6 rivet nuts to fix additional addons. Please only tighten these rivet nuts very slightly, otherwise the plastic…
Fence, glider to be used for the Proxxon foam cutter. 3mm MDF or plywood (example in 3mm populier multiplex) Design : fusion360 with ‘finger joint’ addin lasercutter : Roly LaserMATIC Mk2 XW, 30w some extra foam in de gliderpart can help…
Prototyp Ver 1. LED RING https://tinyurl.com/m8zy9ar 12V DC Adapter Print instructions Category: Hand Tools
DIY dust shield, sand the mount clearance to your preference, assembles with four M3 screws I used a half liter bottle for the transparent shield, you can use whatever else you want
Halter für FLEX-DOT-Schraubendreher von PROXXON - Außensechskant-Schraubendreher Ich habe die ganze Kollektion der FLEX-DOT-Schraubendreher von PROXXON. Leider habe ich keine Halter dafür gefunden die mir gefallen haben, um sie an einer…
You can use the Endstop Limit Switch Bayonet if you are using Makerbot style endstop PCBs. I am using the BigTreeTech & Rat Rig Rodent CNC Controller running FluidNC. You can find the config for FluidNC in the rodent.txt, make sure to…
Gridfinity 6x2 Holder for Proxxon IBS/E rotary tool and accessories There are two parts I used a 0.2mm layer height with a 0.4mm nozzle. Included are the f3d files
Standhalterung für die Proxxon 28192 Heißklebepistole HKP 220 Print instructions Unassociated tags: glue gun, heißklebepistole, HKP 220 , hot glue Category: Hand Tools Summary Standhalterung für die Proxxon 28192 Heißklebepistole HKP 220
Including STEP and fusion360 files. For smaller printers the model is also cut in 4 pieces
osVAC neo M32 - Proxxon FET Adapter
Printing Parameters: Material: PETG Resolution: 0.2 mm Perimeters: 3 Infill: 40 % Supports: no Assembly: 1 hex screw M6x40 1 nut M6
A simple sparepart of the original handrest and a bigger version of the toolrest for the Proxxon DB250 micro woodtunring machine. There are two variants of the bigger version, one has the same height as the original one, the other is…
The supports are compatible with 42mm gridfinity grid. The one with tools is made to accomodate the Proxxon collets holder. The holes should fit 2.4 mm (3/32") and 3 mm (1/8") bits. I usually print those in PET or PLA with brim to ensure…
I made a remix of the Proxxon Vice Clamp (see: https://www.thingiverse.com/thing:1298491 ), so I can use it with my Unimat 1 tool set. Now it has slits for the Unimat mounting system and the centerheight is 5 cm from the bottom. Print…
Um Gewinde Einsätze Einpressen zu können habe ich mir den Proxxon Bohrständer angeschafft und etwas Modifiziert , Aufnahme für die Einpresstifte und ein Prisma für Runde Teile und dann noch eine Kabelführung an der Säule des Bohrständers.…
This is a functioning watchmaker's faceplate. It allows to precisely fix irregularly shaped parts to process them in a lathe. This one has M16 thread on the faceplate and fits Proxxon 150E lathe. I'm sure adaptations can be made to fit it…
This is a remix of an earlier published clamp for Proxxon micomot tools. This one fits in the 5x5x5 cm raster of the Unimat Toolset. That also means you can only use it for the smaller Proxxon Micromot series like 50E Print instructions…
Using your proxxon vice on the kitchen table or a random cuppord and not wanting to damage any surfaces? This is your 30min-print-time solution. Prints in pretty much any material - No supports needed. Recommendet print settings: 0.4…
I have a Dremel "shaping platform" and wanted to use it with my Proxxon micromot. So I designed an adapter for it. The adapter is basically a collet that fits th 2 cm collar of the micromot. Print instructions Category: Hand Tools Summary…
This holder has especially been made for the small hobbyist hot air gun 27130 from Proxxon. The gun fits very well into the 45,5mm center hole which is slightly sloped to the user to get the gun out as easy as possible. Width: 60mm It is…
I wanted to design this tool similarly from scratch but I found this smart design on thingiverse and I adapted the tool mounting system to work with proxxon tools with 20mm mounting ring like the FBS 240/e
I recommend to print 4 perimeters with 0.4mm nozzle. I has been using 25% infill. The base is a little bit shortened for tight fastening. Note: Please grab remaining pieces from original model. This is only a stand, you will need more…
The part is marked as WIP since I need to fix the face plate on the back. You can already use the parts if you install the original Proxxon plate on the back of the lower axis. The original files for the lower axis are off center on my…
Halter für FLEX-DOT-Schraubendreher von PROXXON - Schlitz-Schraubendreher Ich habe die ganze Kollektion der FLEX-DOT-Schraubendreher von PROXXON. Leider habe ich keine Halter dafür gefunden die mir gefallen haben, um sie an einer…
A set of magnetically attached way covers for both the lathe bed and cross slide. The bed covers are meant to hold 100mm flat bellows which can be found on ebay for pretty cheap. They consist of one bottom piece that attaches to the bed…
Attach 900M style soldering iron to your drilling station. The trilling station hole diameter is 2cm.
Dremel Holder for Hobbymat MD65 or Proxxon SD 300 with original tool post
Hello everybody, this is my latest project: a CNC conversion of the Proxxon MF70 milling machine. The mill was upgraded using a combination of Ender 3 components and a few additional parts. For control, I’m using the original 3D printer…
made as a freelance collab with some scammer pretending to be torva tiling director, gave him the stl and then didn't wanna pay so I'm making this available for free uses m5 thread hose connector
Simply stick on the screw. Detailed Remix of the Model by Goto Dengo. Needs M4 x 18 mm screws and two nuts M4
Organizer was primarily designed to replace the original accessories boxes for Proxxon FBS 240/E Multi-tool, but it may fit other Proxxon tools as well. The goal was to create a box that perfectly fits the casing bay and can hold more…
Printed with PLA, 0.20mm layer. Mounted with double sided tape. Edit 1: Added one side version. Allows handle to freely move also in fully extended position. Edit 2: Added proxxon-press-mp-120-hex-key to hold hex wrench “5”.
My Proxxon vice is solid steel. The steel jaws are unforgiving when clamping objects made from soft or fragile materials. To protect the vice held object, I designed some flexible TPU jaw protection covers. The covers provides a soft…
allows you to use your Proxxon Micromot 50/E as spindle for the Alfawise C10 engraving machine. The adapter has a 45mm outside diameter and might also fit other engravers. There are two adapters which can be used independently. One mounts…
This is a copy of the end mill holder that came with my Proxxon MF70 micro mill. My clone is slightly shorter and holds four end mills instead of the original three. Max dimension of the end mills 3,2x38mm It retains the snap open, snap…
Little collet and tool holder for the Proxxon Micromot collets and tools. Stores up to 16 tools. The Diameter of the holes is 3,6 mm so it will take 1/8" shafts easily. The hooks need support.
A hinged case for 50mm and 58mm saw blades for the Proxxon KS230 mini table saw. Edit1: Fixed an error in the TOP file. Edit2: Overall improvements. 2mm bigger on each side to better fit the 58mm blade. Edit3: Uploaded the sketchup source…
34mm to 20mm reduction for stand Proxxon mini drill Redukcia do stojanu Proxxon 34mm na 20mm pre mini vŕtačku Proxxon
I created gridfinity storages for the Proxxon 23112 3/8 Ratchet and sockets. I forgot to take a photo from the 19 sparkplug socket gridfinity, but it's there ;) The gridfinity isn't stackable. All items are 3 cm high. This gives them a…
![Proxxon Micromot MICRO-Press MP 120 tool holder [Fusion 360 source]](https://media.printables.com/media/prints/232580/images/2112857_d337db02-70fb-4859-a2b2-14e335257022/proxxon-press-mp-120-bits-holder-v3.jpg)
