Right Angle Adapter V4 for Proxxon FBS/IBS Quiet Spiral Bevel Gears, dampened
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
redesigned using spiral bevel gears and tpu dampers, the noise is significantly reduced, see video
- Rating
- 0 / 5
- Likes
- 15
- Downloads
- 100
- Makes
- 0
- Views
- 770
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
Previous versions were really loud because of the straight bevel gears, using spiral bevel gears design the noise is reduce significantly. See Video:
This version also uses a bigger main shaft bearing, with a more precise assembly method with guaranteed bearing alignment.
The bearings are held by friction, you can slightly adjust their position so the gears mesh correctly.
Do not overtighten the bolts, the tip connector can be printed in harder TPU for more noise reduction (any impact from any loose clearance can cause noise)
Stronger case designed for better printability with no supports needed.
Parts needed:
- 3 x M3x14mm screws
- 3 x M3 nuts
- 2 x 688zz bearings
- 1 x 625zz bearing