1 / 5
Right Angle Adapter V4 for Proxxon FBS/IBS Quiet Spiral Bevel Gears, dampened — zdjęcie 1
1 / 5

Right Angle Adapter V4 for Proxxon FBS/IBS Quiet Spiral Bevel Gears, dampened

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

redesigned using spiral bevel gears and tpu dampers, the noise is significantly reduced, see video

Ocena
0 / 5
Polubienia
15
Pobrania
100
Wydruki
0
Wyświetlenia
770
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution — Noncommercial — NoDerivatives

Previous versions were really loud because of the straight bevel gears, using spiral bevel gears design the noise is reduce significantly. See Video: 

This version also uses a bigger main shaft bearing, with a more precise assembly method with guaranteed bearing alignment.

The bearings are held by friction, you can slightly adjust their position so the gears mesh correctly.

Do not overtighten the bolts, the tip connector can be printed in harder TPU for more noise reduction (any impact from any loose clearance can cause noise)

Stronger case designed for better printability with no supports needed.

Parts needed: 

  • 3 x M3x14mm screws
  • 3 x M3 nuts
  • 2 x 688zz bearings
  • 1 x 625zz bearing

 

Tagi