Counting matching models…
Christmas tree ornament. 6 variants (3 sizes: 40, 60 and 80 mm, different number of ribs). Print with supports on the print plate to increase stability. ❗Large balls with dense ribbing are heavy (approx. 120 g).
The wavy decorate shelf is 71cm wide (28in) and can hold up to 5Kg securely. Installation notes: 1. All 6 pieces has their part name engraved in the back 2. Start with the ‘left bottom’ part 3. Connect ‘left middle’ and ‘left right’ parts…
(DE) Stabiler, schnell zu druckender 45° Winkel mit Versteifungsrippen und 6 Bohrungen. Egal, ob Sie ein DIY-Projekt planen oder Ihre Wohnräume aufwerten möchten, das robuste und leichte Design garantiert Stabilität und Langlebigkeit. Die…
This model is compatible with the lego system.
Christmas tree ornament. 8 variants (3 sizes: 40, 60 and 80 mm, different number of ribs). Print with supports on the print plate to increase stability. ❗Large balls with dense ribbing are heavy (approx. 100 g).
Sometimes it is practical to use the ProXXon IBS/E to cut thin pipes or rods. And it would be nice if this could also happen at an angle of 90 °. So I did a remix of the cool tool published by GreaseMonkey88 to cut small diameter rods or…
¡Sumérgete en el mundo de Fondo de Bikini con estos detallados modelos 3D de las icónicas casas de Bob Esponja, Calamardo y Patricio! Estos diseños están listos para ser impresos y son perfectos para fans de todas las edades.…
This model is compatible with the lego system.
My idea was to make various ceramics tools based on the needs of the classroom and the teacher. For all of the ceramics tools, I first did an estimate of what the tools would look like in real life (my estimate was 10 x 10). I sketched…
8 variations of Christmas tree ornaments. Single and double ribbing. 3 sizes: 40, 60 and 80 mm. Print with supports on the plate to increase print stability.
Electric Guitar model based on Gibson Les Paul. STL file is more or less 1:1 scale. For printing I've used 0,35 scale factor, in my opinion it give best results. 0.2 layer for body and 0.1 layer is ok. To avoid supports, neck is divided…
Looks great with 0.2mm layer height but only gets better with smaller layer height! Very easy to print, doesn't need anything special.
Remixed it with 2 and 3 ribs to have it firmer for heavy load, so I can use less of them. Print it with the holes on the plate (like the original one). Print settings Material: PETG (or any other material that can handle the load).…
The Gibson Flying V is a unique and iconic electric guitar model known for its radical design and powerful sound. Introduced by the Gibson Guitar Corporation in 1958, the Flying V was one of the first electric guitars to depart from the…
Designed for creating different patterns or finishes on the surface of the clay.
Printable pickup cover for a Fender "Soapbar" pickup, essentially a P90 pickup like Gibson would make. Modeled from scratch however I used the linked adapter as a sanity check that everything should be in the right place. Depending on…
Pickguard modeled after a Gibson Les Paul Standard. Includes .stp for customization and blank .stl for traditional design in your choice of color.
Hello again, Today i want to show you famous Gibson SG. it's designed as I used to do it before. Only two parts, no need for support. Model is 35 cm long. This time I made video of printing and post processing. You can find it here :…
A small desktop organizer. Designed to be printed with a 0,4mm nozzle and 0,2mm layer height. (Wall thickness is 0,8mm) Approx 9-10 hours print time on my Prusa MK3 with add:north E-PLA
I designed a replacement truss rod cover for a Gibson guitar, capturing a vintage style that complements the instrument’s classic look. The cover features mounting holes spaced 52 mm apart from the hole centers, ensuring a precise fit…
I created this storage box to keep my calligraphy nibs safe. It also allows you to grab a nib more easily. It can store two types of nibs, the classic ones (half circle) and the tiny full circle ones. Feel free to modify the numbers of…
Set infill to 50% Can be attached to the wall with 2 screws or 2-3 medium red command strips.
The jack plate on my Gibson Les Paul Studio II disintegrated so I created a new one to print in Wood PLA or ABS. The difference between this one and stock is really the jack spacer is inset on the top rather than stick out further. I also…
The Gibson SG is another iconic electric guitar model that has made a significant impact on the world of music since its introduction in 1961 by the Gibson Guitar Corporation. The "SG" stands for "Solid Guitar," reflecting its…
I have added some reinforcements to the 3D model because in the first impression they were broken when removing the support. After printing this version, now with these reinforcing ribs it gives greater solidity. Speed - 60% Infill - 15%…
Gibson Les Pauls model need support
This model is compatible with the lego system.
I want to make expensive art tools accessible to everyone! Currently working on a collection of pottery ribs. Feel free to suggest another set of tools to make! 3D modelling: https://www.tinkercad.com/ Font:…
This model is compatible with the lego system.
After not being able to find a design i liked i designed my own sun shade. This is v3 Smooth. see link below for v4 ribbed version. https://www.printables.com/model/525879-hunting-rifle-scope-sun-shade-long-slash-cut-ribbe This was built…
Description I designed this model as a gift for one of my best friends. I aimed to faithfully reproduce one of the most iconic guitars in rock history: the Gibson Les Paul . I transformed it into a smartphone stand to keep on the desk…
This model is compatible with the lego system.
Hi, This is a guitar body that has been designed to be built in a fablab, using mainly a 3D printed for the inner parts, and a laser cutter for the outter parts. It is composed of 4 3D printed parts that snap together. You just have to…
You can make any shape of pottery rib that you want. Seven example ribs are provided in file names “rib 1” through “rib 7”. I printed using PLA and the default settings in PrusaSlicer for 0.2 layer height with "Generate support material:"…
I recommend to print it solid and switch colors once it starts to print the letters. Print Settings Printer Brand: Creality Printer: Ender 3 Rafts: No Supports: No Resolution: 200 Infill: 38 Filament: PolyMaker PETG Category: Music
Ribs have been slightly oversized for clearances. Note, the body of this model is round pipes, with a midsection through the Z origin. Your cut operation only needs to be Z+. Does not contain the center badge. Test printed and fit on…
The Gibson Les Paul is one of the most iconic and revered electric guitar models in the world, known for its rich history, timeless design, and versatile sound. It was first introduced by the Gibson Guitar Corporation in 1952 and was…
Our class created a variety of school improving projects for our ceramics class. Some did roller patterns, spatulas, texture rolling pins, and ribs. I choose to do ribs and talked with our schools ceramics teacher, Mr. Schifone, to create…
Introducing the Kanso Ribs Vase —a masterpiece of minimalist design that perfectly embodies the Japandi ethos. "Kanso" means simplicity, and this vase lives up to its name with its smooth, rounded form and delicate ribbed detailing. The…
Printable in two parts, the barrel and the feed. I printed the feed with a 0.25mm nozzle at a 0.12mm layer height and the barrel with a 0.4mm nozzle at a 0.2mm layer height. The barrel is 95mm long which I find a comfortable size but you…
I like insulated can holders to help keep a drink cool, and made a 3D-printable version! The main tricky part in designing this was figuring out a way to make the can fit snugly without making it too tight. The problem with making…
This is a neon sign inspired by the Gibson logo. It is only a three piece assembly. I bought the EL wire off of amazon. They come in all sorts of colors. The peg in the middle a lines the two pieces to glue them together. I used gorilla…
The design is solid and should be printed in vase mode with a 0.4mm nozzle. If you use a larger nozzle try and scale the model larger.
Loved the set of guitars deigned by @MalinaPl_792047. I thought the set could use a Gibson Explorer, so I made one. Includes full size (more or less) body, neck and custom stand. I like to print these models at 1:4 scale - about 9.5"…
ENGLISH I lost the original control cavity cover on my 2011 Gibson Les Paul Studio. After realizing that replacement covers available online are either overpriced or don't fit the Studio model properly, I decided to make my own. The model…
Do not print vertically. Print horizontally or as I did at an angle. This is because if printed up right it will eventually break as the forces are horizontal. This remix includes ribs for better contact.
Public domain model of a Gibson Explorer re-issue electric guitar by ziwerliz . Originally uploaded to Blend Swap .
This model is compatible with the lego system.
Gibson made the SG Pro for 2 years, and the pickup and rings are a different size than a traditional P90, so they are literally unobtianium at this point. I acquired my 72 SG Pro and the brittle bakelite pickup rings were cracked (at…
This jig is to be used to cut the end part of the guitar head type Gibson SG. Trace the center longitudinal line of the piece, adjust the jig so the line is visible thru the holes, secure it and you are good to go. It has been designed…
Two Jigs for cutting a circle in light material (PC, wood …) There ar two jigs, one for the diameters of 50-160mm (in 10mm increments) and the second one from 55-165mm (in 10mm increments). Use a 2mm milling cutter , with 3mm you have to…
A model i made while practicing fusion 360. I didnt include the strings. because it would probably not end well… Moddled in real size you will probably have to resize to print. But going too small may result in some very fragile parts.…
prints without supports (print orientation as shown in pictures) 250x200 minimum buildplate size. layer height: 0.25 or 0.2 walls: 2 I used 10% infill
I recommend printing upside down (chamfered edges down) to keep the nice surface visible, and the likely rougher top print surface in contact with the strap. Not really a remix (a new model), but I did ape Mikolas' design. His model…
Designed for the 1st generation rockets of "Die Sternenfahrer von Catan" von Cosmos. Brim and support on build plate only are required. The replacement ring require to remove the existing (often broken) boosters' fixations. I did use a…
A very accurate model of the classic Gibson-style “poker chip” pickup selector switch indicator/cover. Originally designed for SLA printing, this also works with FDM printers. I'd recommend 100% solid layers, as it's not very thick and…
The piece from my Volkswagen Passat B6(3C) front right central vent that adjusts the ribs was missing and I decided to mock up a stl after the left central vent and reverse it. Printed using black ABS and it works/looks like it belongs…
Thoracotomy ribs and rib holder. Was used in conjunction with an old CPR manikin for more fidelity, but could be used as stand alone.
Printing plastic replacement parts is the what makes 3D printers really useful. Even though these nibs for the graphic tablet pens are probably not easy to print due to their small size I wanted to try it. So I measured the diameter of an…
Previous versions were really loud because of the straight bevel gears, using spiral bevel gears design the noise is reduce significantly. See Video: This version also uses a bigger main shaft bearing, with a more precise assembly method…
Patreon - https://patreon.com/CosmicNimbusPrinting Cults3D - https://cults3d.com/en/users/CosmicNimbus Hi there, I love this clip a lot ! But it needed some ribs so it wasn't so slippery to use on the line. My partner also wanted the…
Keep your playmat neatly rolled and bag-friendly with this lightweight, parametric playmat ring. The split design gives a gentle squeeze so the mat doesn’t unwind in your backpack, while the outer micro-ribs improve grip and the inner…
This is a 3mf file for Bambu X1C to print ribs 1-6 standing vertically at 0.16mm layer height, 0.4mm nozzle, 200% scale. All manual supports/brims are already setup ,as well as variable layer height. I made sure layers never go over…
About this model This model was designed in FreeCAD - FOSS (Free and Open-Source Software) 3D parametric modeler. Source file is available. This is a parametric (means you can adjust some aspects of it) cylinder container with a screw…
This is the base fixture. Additional custom made parts can be mounted on this base fixture. On the side, you can insert 2 M6 rivet nuts to fix additional addons. Please only tighten these rivet nuts very slightly, otherwise the plastic…
This model is compatible with the lego system.
Hello! Just get my new 3d Printer- Bambu lab p1s. This time all colours are made with ams. Effect is great. Body- black matt Bridge&pickups - Silk gold Fretboard - chocolate brown Frets- Silver I put 3mf and stl files as well. All other…
Trianglar version of one of my designs. Intended to be printed with 0,4mm nozzle and 0,2mm layer height.
Whenever I see Kluson style tuners on a Gibson guitar, it makes me wish that they were glow in the dark. I made this model so that I can print a set of tuner knobs in glow in the dark PLA. These fit my Kluson locking tuners, so I'm not…
DIY dust shield, sand the mount clearance to your preference, assembles with four M3 screws I used a half liter bottle for the transparent shield, you can use whatever else you want
A Wacom pen holder featuring a nibs storage compartment, taking inspiration from similar commercial designs. Can be printed without supports. The Top part should be printed upside down (threads up). Please note that for the threads to…
Gridfinity 6x2 Holder for Proxxon IBS/E rotary tool and accessories There are two parts I used a 0.2mm layer height with a 0.4mm nozzle. Included are the f3d files
I want to make expensive art tools accessible to everyone! Currently working on a collection of pottery ribs. Feel free to suggest another set of tools to make! 3D modelling: https://www.tinkercad.com/ Font:…
A .3mf file is supplied. The 3 files must be separated by the slicer. Print the tray part flat to bed (obvs), print the large lid on the flat edge that meets the tray section end (the other end is rounded, not suitable for bed adhesion).…
Had a coworker need a gibson/les paul pickup plate. Apparently this is a rare one to find as it has two holes on one side and one on the other. Modeled it in CAD based on the original so it is an exact fit. It is confirmed working.…
10% Infill seems to be enough for this model. I printed with Fillamentium White PLA. It seems to fit the Eero Pro 6E Mesh well and within an hour the unit seems to be cooler and the desktop is no longer hot.
if you print this (or any other kind of frets) i recommend this https://www.printables.com/model/1393234-neck-damping-rubber
The ever cheerful Nuroh Gribsek. Currently reworking in to a full character. :) Quick bit of weekend fun in Zbrush. Printable without support.
A tray for guitar picks or other small stuff. It's easy to print and also a nice gift. Print Settings Printer: Self built Rafts: Doesn't Matter Supports: No Resolution: 0,2 Infill: 20 Filament: Sunlu PLA+ Grey Notes: You can actually take…
A 71cm wide wavy ribs shelf - thin version requiring less than 20 hours of print Requires 3 screws to attach to the wall Can handle load of up to 5kg
A highly detailed blacksmith character, requiring no support to print. I wanted to create a character that knew their craft inside out over many years and was satisfied with a happy customer and a job well done. Tested fine with FDM and…
(DE) Entdecke Deine 3D-gedruckte Lasche ob mit oder ohne Verstärkungsrippen – die perfekte Lösung für alle Befestigungsbedürfnisse! Mit sechs Kegelsenkungen für Schrauben bietet sie nicht nur Stabilität, sondern auch eine einfache…
I designed this simple soap dish to keep my soap from getting soggy.
I want to make expensive art tools accessible to everyone! Currently working on a collection of pottery ribs. Feel free to suggest another set of tools to make! 3D modelling: https://www.tinkercad.com/ Font:…
You can scale this down a lot and still get good detail with a standard .4mm nozzle. At 50%, the loop prints cleanly, but it is very fragile. I used 2 perimeters for roughly the first 7mm and the last 18mm. In between, I just used 1…
This 3D-printed miniature Gibson Les Paul guitar captures the timeless elegance of the legendary instrument. A must-have
A very simple box to store your standard calligraphy nibs. Space for 42 nibs. It uses 4 small 5x1mm magnets to stay in place (adjustable) but you can also simply print it without the magnets and it'll stay in place since it has a fit in…
This is a 3mf file for Bambu X1C to print ribs 7-11 standing vertically at 0.16mm layer height, 0.4mm nozzle, 200% scale. All manual supports/brims are already setup ,as well as variable layer height. I made sure layers never go over…
Wall hanger for your guitar straps. Works with both Schaller and Dunlop strap locks, as well as just a standard strap with no lock. Two color print. Attach with good double sided tape or you could use small screws through the strap button…
A highly detailed blacksmith character, requiring no support to print. I wanted to create a character that knew their craft inside out over many years and was satisfied with a happy customer and a job well done. This remix is split in to…
Umbrella Rib carrier for 6 ribs 38mm beach umbrella ( repair old broken umbrella ) print for top or bottom with strings risers for both sides 24x 30mm m3 hex screws each is 12 ( 6 for the rib carrier and 6 to bolt down everything I used…
Twisted square tube with counter rotated ribs. Print without supports in any material. Make your own variations using the OnShape link. CADLink:…
This is an additional test of "crush ribs" which I learned about from this video from this video : See also : https://www.prusaprinters.org/prints/43586-test-print-crush-ribs-version-01 Short version : A general solution to the problem of…
This 3D-printed miniature Gibson SG guitar captures the iconic design of the legendary instrument. Perfect for music lov
Portachiavi a Paletta gibson les paul custom
Proxxon Grinder IBS Tool Box replace to original one. 2019-07-04 Updated The Cover thickness had change to 1.4mm, and removed the solid area of the cover top also. Category: Parts
