1 / 2
Ikea PRESSA Octopus Hanger Clip - with ribs and soft teeth — image 1
1 / 2

Ikea PRESSA Octopus Hanger Clip - with ribs and soft teeth

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

I added ribs to make the handles grippier, increased the clearance on the teeth, and softened rounded the teeth too

Rating
5 / 5
Likes
10
Downloads
100
Makes
1
Views
424
Reviews
1

Updated at source:

Model information

Category
Home Decor
License
Creative Commons — Attribution — Noncommercial

Patreon - https://patreon.com/CosmicNimbusPrinting 
Cults3D - https://cults3d.com/en/users/CosmicNimbus

 

Hi there,

 

I love this clip a lot ! But it needed some ribs so it wasn't so slippery to use on the line. My partner also wanted the teeth to be a little rounder so it wasn't so harsh on the laundry. On all of my prints the teeth were welding together, so I increased the space they are away from each other.

I've included 2 versions of each clip

  • One with ribs and teeth clearance
  • The other has these fixes and rounder teeth

I had the most luck printing the clip with 0.35mm clearance. The 0.2mm clearance hinge seemed to weld together if it was printed on anything other than 0.12 layer height - although with this setting the hinge is a little more sturdy, it took me much longer to print it. The 0.5mm clearance worked as well but the hinge is a little looser.

I printed these in PETG with 100% infill to make sure they are strong enough.

 

Happy Printing !

Tags