Ikea PRESSA Octopus Hanger Clip - with ribs and soft teeth
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
I added ribs to make the handles grippier, increased the clearance on the teeth, and softened rounded the teeth too
- Ocena
- 5 / 5
- Polubienia
- 10
- Pobrania
- 98
- Wydruki
- 1
- Wyświetlenia
- 420
- Oceny
- 1
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Home Decor
- Licencja
- Creative Commons — Attribution — Noncommercial
Patreon - https://patreon.com/CosmicNimbusPrinting
Cults3D - https://cults3d.com/en/users/CosmicNimbus
Hi there,
I love this clip a lot ! But it needed some ribs so it wasn't so slippery to use on the line. My partner also wanted the teeth to be a little rounder so it wasn't so harsh on the laundry. On all of my prints the teeth were welding together, so I increased the space they are away from each other.
I've included 2 versions of each clip
- One with ribs and teeth clearance
- The other has these fixes and rounder teeth
I had the most luck printing the clip with 0.35mm clearance. The 0.2mm clearance hinge seemed to weld together if it was printed on anything other than 0.12 layer height - although with this setting the hinge is a little more sturdy, it took me much longer to print it. The 0.5mm clearance worked as well but the hinge is a little looser.
I printed these in PETG with 100% infill to make sure they are strong enough.
Happy Printing !