Dip pen for use with Lamy style nibs
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A fully 3D printable dip pen for use with spare Lamy style nibs
- Rating
- 0 / 5
- Likes
- 20
- Downloads
- 136
- Makes
- 0
- Views
- 867
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Office
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
Printable in two parts, the barrel and the feed. I printed the feed with a 0.25mm nozzle at a 0.12mm layer height and the barrel with a 0.4mm nozzle at a 0.2mm layer height.
The barrel is 95mm long which I find a comfortable size but you may wish to stretch it out a bit longer.
From my testing one dip should be enough to write at least 5 lines on A5 paper with a very consistent flow unlike with a glass dip pen.
The feed should be a friction fit in the barrel, depending on your printer tolerances you may need to scale the barrel up slightly. I would avoid scaling the feed as the nib has to friction fit on to this.
I've included a model for a Lamy style nib in the files but I don't have a printer capable of printing it.