Counting matching models…
Pretty basic model :- ) I found the Lamy converter a bit hard to twist sometimes, this is a knob to slip over the shaft to make it easier. I used fuzzy skin on outside surfaces. Don't get too jiggy with the extra leverage and over…
This adapter lets you use the UMR‑85N refill in your Lamy Safari Rollerball. UMR-85N instead of the M63F Extends the refill from a Uniball Signo 207 about 4mm to fit the Lamy Safari Rollerball. The front spacer is optional. The fitment is…
This model is free. If you appreciate this model, please leave a download and a like! This is a custom-designed bed bumper system made specifically for the Bellamy Pinette bed. The model does not interfere with the drawer. The blocks…
This is a rugged case for Lamy pens. It will accommodate 6 13mm diameter pens. I will make another inserts with one side with compartments for accessories. Like fountain pen tanks etc. I used the Case Medium size from the original design.…
You might have to grind the inside to make it fit if the layers of your printer are to thicc. I first tried sandpaper, but found out that a little rounded file (picture 3) works best.
The Lamy 2000 fountain pen normally uses a little ring that prevent the nib and feed to push up into the section. I misplaced it while cleaning mine, and before trying to find it again or order one replacement online, I estimated the size…
I love using my Lamy Balloon pen but the official cartridges it comes with are terrible to write with. Instead. I designed a small adaptor, to be attached to the tip and the back of any ballpoint cartridge/insert. It’s very simple to…
Supernote AX2 Manta LAMY Safari Vista Pen Clip Printing Recommendations For best strength, print vertically (with the layer lines perpendicular to the Supernote)
Dieser Ring kann auf den Lamy Safary Füllferderhalter gesteckt werden, wenn der Deckel andauernd abfällt. Er ersetzt den zu dünnen alten Ring und gibt der Kappe so mehr halt!
Cap for fountain pen ink converters. Tested with converters for Lamy, Pelikan and Kaweco. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.15 Infill: 15% Filament: Das Filament PLA Gold Category:…
BLACK SAM BELLAMY (THE ROBIN HOOD OF PIRATES) IF YOU ENJOY THIS COASTER PLEASE LIKE SUB AND FOLLOW FOR MORE CONTENT. THANK YOU!!
Lamy Pens have proprietary ink cartridge refills and are a custom length (11.5 cm) This File adapts 3rd party ink refills that are shorter to fit the Lamy Safari Pen Body; such as the popular Retro 1951 Pen Refill (Schmidt 8127), and the…
Lamy Pens have proprietary ink cartridge refills This file adapts the Pilot G2 Cartridge to fit the Lamy Safari Rollerball Pen Body. This File adapts the Pilot G2 refills that are shorter to fit the Lamy Safari Rollerball Pen Body. This…
The Lamy Safari's cap is held together by a plastic screw going into a brass bushing. The screw is fragile and can snap if too much stress is put on the clip. This is a replacement for that screw. The thread in the bushing is M5, which is…
this my castom project for Lamy safary fountain pen.
Layer height: 0.15 Nozzle size: 0.4mm Solid: 20% A spring is necessary for the mechanism to work (I have used the one from a pen that did not work)
Layer height: 015 Nozzle 0.4mm Solid filling:20% See the video:
This is a simple Lamy safari filler cap. I printed at 15% infill . I used PLA, but I think other filaments will work, besides TPU. If you have any questions, feel free to contact me. I'll create a V2 at 40 likes.
This is a spacer/insert for use when using a Lamy EMR grip/module with a Lamy Safari Vista body. This is not a functional piece, or needed to build this custom EMR pen, just fills out the empty space with a color of choice. Could also add…
After getting my pants ruined because my Lamy Safari opened itself on my pocket, I designed this simple lock to maintain it closed and avoid future accidents. Print it with TPU, I used 3 walls at 0.2 layer high and 0.4 nozzle, no supports…
This dust cover reliably protects the USB-C port of the LAMY Safari Digital Pen (for iPad) from dust and dirt. The cover is simply attached and sits perfectly in the connection. Tested with the LAMY Safari Note (Red), but should also fit…
Wife got me a sampler of Lamy T10 ink cartridges for my Lamy Vista which I didn't want to either get crushed in my bag or somehow get otherwise lost. Designed this to fit 10 cartridges. The cap should snap into the bottom half, though the…
This is an organizer for boxes of Lamy fountain pen ink cartridges, still in the Lamy boxes. I bought a variety pack of different colors, and needed a way to keep them organized on my desk. And I noticed that they can be arranged to…
Pretty basic model :- ) I found the Lamy converter a bit hard to twist sometimes, this is a knob to slip over the shaft to make it easier. I used fuzzy skin on outside surfaces. Don't get too jiggy with the extra leverage and over…
Remixed from D1 Refill to Pilot G2 Mini (Tactile Turn Mini) Adapter https://www.printables.com/model/595719-d1-refill-to-pilot-g2-mini-tactile-turn-mini-adapt/remixes Summary: I cut this adapter in Orca to fit the D1 refill in a Lamy M22…
This is an adapter that allows Pentel EnerGel LRN5 refills to be used in a LAMY Safari. The fit inside the barrel is slightly loose, but the pen closes properly and writes without any issues.
This adapter lets you use the UMR‑85N refill in your Lamy Safari Rollerball. UMR-85N instead of the M63F Extends the refill from a Uniball Signo 207 about 4mm to fit the Lamy Safari Rollerball. The front spacer is optional. The fitment is…
A simple tray for drying your pen after basic maintenance or ink replacement.
Printed with PLA 0.12 mm layer height 20% infill No supports
I use the Lamy Al-star EMR Stylus (with Wacom Fel Nibs) on my Boox Note Air 2 and love it. The only issue that i had was that there was no possibility to attach the stylus neither to the device nor to the cover. So i made this small clip,…
UPDATE March 2018: The THINGIVERSE Customizer is broken!!! Please use the pre-build version or download the OpenSCAD file and customize it all by yourself (see below for the english text) Container z.B. für Lamy oder Parker…
This model is free. If you appreciate this model, please leave a download and a like! This is a custom-designed bed bumper system made specifically for the Bellamy Pinette bed. The model does not interfere with the drawer. The blocks…
made from svg created in inkscape print with PETG if you want to place it ouside
Length adapter to use a Uni-ball UMR-87E refill (Signo 207/307) into a Lamy Safari rollerball. Printed with PLA, 0.4mm nozzle, 0.2 layer height, 2 outer walls, 2 top and bottom layers, on Ender V3 SE.
I like fountain pens. My current favorite is the Lamy Vista Fountain Pen . The one drawback is that I write in two colors – blue (or black) and red. But the pens only come with a black finial (the end part of the cap). So I…
I made this stand for my Lamy Safari fountain pens. I designed it to print with no supports and to be minimal like the pen itself. I recommend printing with a very high infill (90-100%) to add more weight to the base.
A box for Lamy ink cartridges. Print in place. You need supports!
Sometimes you run out of ink while you're out traversing the world and your cartridge in your pen runs dry. Now you can bring a spare with you anywhere you go in a convenient little trinket that looks just like a Lamy Safari. Just like a…
LAMY Converter Thumb Screw You love your LAMY but refilling is a pain? Make it easier with the LAMY Converter Thumb Screw! Safari and AL-star are two works of art, but I have always found their converter to be a bit of a pain: the knob is…
EN - Magnetic label in czech/slovak language, on the post box - to prevent adverisement. Magnets could be inserted from the bottom, could be fixed with glue. CZ - Magneticka cedulka na postovu schranku - bez reklamy. Magnety sa daju…
Fits on Prusa Mini Nozzle: 0.4mm Material: PLA, anyone works Print: 0.2mm Perimeters: 3 Support: Not required Brim: Not required Infill: 15-30% Fill pattern: Gyroid (This is important in gridfinity pieces with magnet holes)
A nice looking weighted orb which serves as a nice desktop holder/stand for your fancy pens. I originally designed it to fit a Lamy 2000 Multicolor Pen, but it fits many pens in the size range of ~1cm in diameter (max < 11.8mm in…
This can store 5 Lamy ink cartridges using pressure fit. It is a simple design to keep your Lamy Ink cartridge's safe when travelling or on the table Do be careful though, the clips have a habit of snapping if you use PLA Category:…
With this adapter you can use alternate ink cartriges with your Swift pen. It converts generic G2 type cartriges to M66 cartriges. The previous versions of the adapter caused some problems with the ink flow. v5 has some holes to improve…
Gridfinity 1x3x3 Ball pen ink refill cartridge Maximum refill size is 6.3mm x 118mm. Tested with LAMY M63 & LAMY M16 A place for optional label at the bottom
Just print this cap. Insert two 5x2mm magnets (e.g. https://amzn.eu/d/1RFlRqu) and now your Lamy will snap on your remarkable 2.
This is a tiny plug adapter that allows you to easily fit a Pilot G2 Gel refill into a Lamy 2000 Rollerball. The Lamy refills are both harder to find also limited to only medium and broad width. It's not rocket science but this little…
This is a replacement cap for a Lamy Al-Star EMR Stylus. It is not guaranteed or likely to fit other models of Lamy pens. The fit is tight and it should snap firmly into place. Able to post on the back with a slight ramp inside. Printed…
A 2 x 2 x 7 unit gridfinity container to hold Lamy fountain pen ink.
The model is designed so that both markers (Staedtler Noris Jumbo & Lamy Al Star EMR) can be held both vertically and horizontally. At the moment I have only been able to try out the Staedtler Noris Jumbo, the Lamy is still in the post on…
This is a custom box for Lamy T10 ink refill cartridges. There are two versions, one for 5 cartridges and another one for 9. They have an opening on the cover, so you can quickly check how many cartridges are left and which colors they…
The Idea It is designed for storing my LAMY pens, and I made holes to fit Schneider pens also, then added 6 holes for the storage of LAMY ink cartridge, and a compact area to place your Post-it or any others IMO, I want a concise design…
2/XXX LAMY Safari Ink and Pen Holder I'm doing a challenge where I'll upload 1 model a day until I reach 10k Prusameters or more so I can own a PrusaMini or PrusaMK4 This is a Lamy Safari Ink and Pen Holder. It features a slot for one pen…
This works with the 0.5mm Pilot G2 refills. However when holding the Safari at a normal shallower angle the Pilot cartridge is more scratchy than it should be since it's so fine.
A nice desk stand for a nice pen https://www.lamy.com/ger/b2c/al\_star/027\_bronze#markenwelt Printed mine with 100% infill for some weight Category: Other
A bracket for supporting the annoying parcel shelf on Tesla MY 23-24. No tools needed! Two versions available: left and right. For better support, use both, but a single one works fine as well. I made it a tight fit to ensure it stays in…
I made this simple model to fill up the space above the Supernote pen refill in a Lamy Safari Rollerball body. My refill snapped into the front of the body with an audible “pop!” and stayed put, but rattled back and forth a little. This…
Ich finde Lamy eine toole Marke. Damit kann man sich wunderbar selbst Magnet Schilder für sein Whiteboard erstellen.
Printable in two parts, the barrel and the feed. I printed the feed with a 0.25mm nozzle at a 0.12mm layer height and the barrel with a 0.4mm nozzle at a 0.2mm layer height. The barrel is 95mm long which I find a comfortable size but you…
After my Lamy Safari inked my clothes twice, I searched online and found a solution to making the snap cap tighter. The forum suggested taping the rubber piece inside the cap in order to create a tighter click. It worked but I don't like…
