1 / 3
micro 3x20mm screw anchors
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
anchors I made to fix a door handle
- Rating
- 0 / 5
- Likes
- 2
- Downloads
- 30
- Makes
- 0
- Views
- 165
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other House Equipment
- License
- Creative Commons — Public Domain
This was tricky to print due to small bottom surface area but my A1mini handled it quite well.
Print directions:
- print on the flat side
- turn off wipe
- print slower
- turn on Arachne wall generator
- I also lowered minimum wall width to 60%
- might be good to print on 0.2mm nozzle, I didn't have any so I printed it with 0.4mm nozzle
- use some kind of adhesion helper (glue stick etc.)