1 / 3
Living World animal habitat lid support - angled — image 1
1 / 3

Living World animal habitat lid support - angled

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Lid support for Living World animal habitats

Rating
0 / 5
Likes
1
Downloads
8
Makes
0
Views
37
Reviews
0

Updated at source:

Model information

Category
Pets
License
Creative Commons — Attribution — Noncommercial — Share Alike

We have a Living World animal habitat that we got for our guinea pigs, and over the years the clips that hold and support the lid have broken, and the lid itself has become bent downwards over the years.

I measured one of the broken ones, tried copying the general form factor, but angled the support side upward slightly, to reverse the bowing. Couple future improvements that could be made:

  • Cut back the length of the thin slot on the back - it really only needs to loop over the top bar, the weight of the lid pushes down and back against the wall
  • Make another model that is flat topped, to use with non-warped lids

We only have the one habitat, and I'm not sure if it fits other varieties.

Printed with standard settings:

  • PETG
  • 0.20mm SPEED profile
  • no supports, brim, etc.

Here's the original and printed versions:

And installed:

Tags