Ruixin Pro Dual Stone Holder
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Ruixin Pro RX-008/RX-009 dual stone holder
- Rating
- 0 / 5
- Likes
- 3
- Downloads
- 25
- Makes
- 0
- Views
- 172
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution — Share Alike
The original clamp that secures the arm rod to the aluminum profile broke, and I couldn't find a direct replacement—so I designed my own. I added cutouts to both sides so it can hold one or two stones.
It's quite tight, so you may need to file down the inner walls slightly depending on your printer. Screws on both sides allow for extra tightening if needed.
I bought a few M6x8 heat-set inserts since modeled threads won't hold up to regular use. In a pinch, my original Rx-008 included a brass insert (visible in the first photo), which you can insert with a soldering iron and use another m6 nut as a jam nut, to prevent it coming apart.
I printed it in PETG due to it's more flexible properties but might also work in PLA.