Roll holder for tubular radiators
We calculate the final price from your selected file. You review and accept it before payment.
Estimated printing price per file
€3.07 – €3.75 net (excluding VAT)
For file: Roll_holder_base+cap_0.2mm_PLA_MK3S_4h1m.gcode
This is an estimate for one file. You’ll confirm the exact price before ordering.
File and estimate settings
File used for this estimate
Average indicative estimate: €3.41 excluding VAT (range midpoint).
- Weight reported by the author
- 30 g
- Print time reported by the author
- 4.02 hr
- Source material
- PLA
- Estimate material
- PLA
- Estimate printer
- Bambu Lab P1S - 0.4 nozzle
- Estimate process
- 0.20mm Standard
Indicative estimate for the selected file only, based on the author’s weight and print time. File variants are not added together. The final price is calculated after file analysis.
Saved on this device.
Roll holder designed for 25 mm diameter tubes radiators. Avoid wall fixing. Need a 25 mm PVC tube to be completed.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 6
- Makes
- 0
- Views
- 50
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Bathroom
- License
- Creative Commons — Attribution — Noncommercial
Roll holder designed for 25 mm diameter tubes radiators.
you can avoid wall fixing a roll holder.
It needs a 25 mm diameter tube with 1 mm thick walls to be completed (standard item for electrician plants).
All the parts needs to be glued together.
In order to keep in place just use a little piece of double sided tape between the radiator's tube and the roll holder. Or just zip tie it.