1 / 4
AS5600 support for NEMA14 and 17 motors — image 1
1 / 4

AS5600 support for NEMA14 and 17 motors

Order a print of this model

We calculate the final price from your selected file. You review and accept it before payment.

Saved on this device.

Allows to screw this white PCB with an AS5600 behind a NEMA motor to enable close loop control.

Rating
0 / 5
Likes
9
Downloads
187
Makes
0
Views
634
Reviews
0

Updated at source:

Model information

License
Creative Commons — Attribution — Noncommercial

With 2 M3*4 and 2 M3*25 screws you can add close loop control to your nema motor. This model is made to respect the profile of the motor and add only 6mm behind it.

Simply add a magnet to the shaft and screw this. That's it. There is space to get the wires out.

You'll need to solder the wires on the surface of the PCB, not through.

This model use only 4 screws to save you some material so keep 2 of the original motor screws in place.

Tags