1 / 4
AS5600 support for NEMA14 and 17 motors — zdjęcie 1
1 / 4

AS5600 support for NEMA14 and 17 motors

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

Allows to screw this white PCB with an AS5600 behind a NEMA motor to enable close loop control.

Ocena
0 / 5
Polubienia
9
Pobrania
187
Wydruki
0
Wyświetlenia
634
Oceny
0

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
RC & Robotics
Licencja
Creative Commons — Attribution — Noncommercial

With 2 M3*4 and 2 M3*25 screws you can add close loop control to your nema motor. This model is made to respect the profile of the motor and add only 6mm behind it.

Simply add a magnet to the shaft and screw this. That's it. There is space to get the wires out.

You'll need to solder the wires on the surface of the PCB, not through.

This model use only 4 screws to save you some material so keep 2 of the original motor screws in place.

Tagi