Thumper 1/8 - Links - Metal ball rods end
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
links with metal ball rods end for thumper 1/8
- Rating
- 0 / 5
- Likes
- 10
- Downloads
- 43
- Makes
- 0
- Views
- 271
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- RC & Robotics
- License
- Creative Commons — Attribution — Noncommercial
Link to original model : https://www.printables.com/model/323433-thumper-18-scale-rc-car-cj7-rock-crawler-by-blackc
Link to the high clearance mod : https://www.printables.com/model/1217597-high-clearance-mod-for-thumper-rc-4x4-crawler
Those links replace the ones used on thumper. This avoid a lots a play introduced by 3d printer tolerance, or worn. With those rods i have zero play in rear axle, and in steering.
Just print the part, used M3 20mm headless hex socket screw on each side, then attach a metal ball rod end. Mount in replacement of thumper rod, without the m3 nut.
For steering link, the side of the servo must use a rod end with ball only (not the one with a flat side)
BOM:
- 2x 10pcs ball rod end, M3, 27mm, with a flat side (17 used)
- 1x 10pcs ball rod end, M3, 27mm, without flat side (1 used on servo horn)
- 1x 20pcs m3 headless 20mm screws (18 used)