Stamped card dividers (MTG)
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
These are stamped card dividers for storing MTG cards. Each divider features either an edition or color logo or text.
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 75
- Makes
- 0
- Views
- 669
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Board Games
- License
- Creative Commons — Attribution
Intro
Welcome to your new favourite card dividers for Magic the Gathering!
These card dividers not only show you the mana symbol but also the Magic edition they are coming from.
New editions will be added as soon as possible.
Whenever I have some time I will also add older editions. Any suggestions which edition you want me to add next, just add a comment ;)
Available Editions
As of 29.07.2025 the following editions are available
- Bloomburrow (BLB)
- Foundations (FDN)
- Duskmourn (DSK)
- Aetherdrift (DFT)
- Tarkir: Dragonstorm (TDM)
- Universes Beyond: Final Fantasy (FIN)
- Edge of Eternities (EOE)
Files
For each edition you can choose from six versions.
The versions can be easily distinguised by their filename:
<Edition>_<Filling>_<Edition-Logo/Text>_<Type-Symbol/Letter>_<Version>.stl
Edition: Probably self explanatory, this is the standard three letter edition abbreviation for MTG cards.
Example: FDN = Foundations, DSK = Duskmourn, …
Filling: This describes the filling of the card divider in the card section. (The part that you usually don't see.) It helps you save time and material (PLA Example: Full = 10g, Honeycomb = 5,5g per divider). I would always recommend printing the honeycomb version. In case you are having problems with bed adhesion better stick to the full one.
Edition-Text/Logo: This either prints the edition logo or the three letter abbreviation. Note, as of 29.07.2025 I will only provide the three letter abbreviation.
Until Duskmourn the model use the symbols provided by https://github.com/Investigamer/mtg-vectors.
Type-Symbol/Letter: This either prints the type as logo or letter. As logos, the standard mana symbols, as well as a hill, wastes logo, cup and banner are used. As letters the classic “WUBRG” scheme is applied. Note, as of 29.07.2025 I will only provide the mana symbol.
Version: V2 is the latest one overall. V1 had an issue with non-printable fonts. This was only relevant if you used a “letter” or “text” file. For files only using logos therefore only V1 files exist so far.
Print instructions
Almost none :D
Prints fine with 0,4mm nozzle and 0,2mm layer height. No supports, no brim.
Tested with PLA and PETG.
The stl you chose will contain 9 card dividers. Load it to Prusa slicer, split into objects and arrange it however you want.