1 / 3
PTFE tube (re)director for Sunlu S2 dryer 0.1
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Bends PTFE tube to be placed at a better angle
- Rating
- 5 / 5
- Likes
- 3
- Downloads
- 23
- Makes
- 1
- Views
- 182
- Reviews
- 1
Updated at source:
Model information
- Source
- Printables
- Category
- Accessories
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
By default PTFE tube is connected perpendicular to the spool, in case of TPU that caused issues for me, filament didn't move freely.
Installation:
- Remove screws (see second picture)
- Remove the original PTFE ring from the hole
- Place the printed part as shown on the pictures
- Put screws back but don't tighten them too hard, there's going to be a 1-2mm gap now. Could be fixed with better model tuning.
- Insert PTFE tube