1 / 5
Housing for LED Driver DPL110
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Housing to use the LED driver DPL110 for a desk lamp
- Rating
- 0 / 5
- Likes
- 1
- Downloads
- 14
- Makes
- 0
- Views
- 49
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Electronics
- License
- Creative Commons — Attribution
This is a design of a housing to use the LED driver DPL110 (350mA, 10W) for a desk lamp.
The original power supply was broken and I did not find any suitable replacement.
Printing
- bottom, cover and 2x cablefixator should be printed with ABS, PETG, or similar
- grommets with flexible (TPU)
Assembly
- fixation of the DLP110:
- 2x 2.9x6.5mm tap screws
- there is 2 types of grommets for 2 different wires:
- 6mm round (typical power supply cable)
- 2x 2.9x13mm screws
- twin cable 2x0.75mm (typical low voltage cable)
- 2x 2.9x9.5mm screws
- 6mm round (typical power supply cable)
- assembly of housing
- 4x 2.9x9.5mm tap screws for the housing