Gonked up Koda Magazine Caps
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
New magazine end caps for OoD Koda mags to improve feeding and reliability
- Rating
- 0 / 5
- Likes
- 12
- Downloads
- 43
- Makes
- 0
- Views
- 327
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Other Toys & Games
- License
- Creative Commons — Attribution — Noncommercial — Share Alike
UPDATES:
14/04/25
Published
This is my modification to Out of Darts Koda nerf magazines to reduce the likelyhood of the spring tangling when at full capacity.
Myself and others have unfortunately come across issues with Koda magazines where the spring tangles when pushed to full dart capacity (23 darts). Obviously this isn't ideal, so I went ahead and gonked things up 😎
There is very little room for the spring to fully compress in a Koda, and nothing stopping the spring moving from side to side, so I have added a spring guide in the middle of the magazine cap to both centre the spring, and provide an endstop for the follower so the spring cannot be compressed beyond its limits.
I have also added another version that had slots for a TPU bumper, increasing the durability of the cap and adding some more colour.
Unfortunately due to having to give the spring more room when compressed, this does decrease the maximum dart capacity of the Koda. The regular cap can fit a maximum of 21 darts, and the bumper version can fit 22 at a push. I feel this is a worthwhile tradeoff for massively improved reliability. A .step file has been provided if you wish to increase dart capacity or make other changes.
This project is licensed under the terms of the Creative Commons Non-Commercial Attribution Share Alike 4.0 license, which means you can print it, remix it, share it, and if you do and give myself credit. You cannot sell this without permission from myself.
Build Notes:
I printed the TPU bumper in 95A hardness TPU, it requires a little bit of effort to push the bumper into the cap but it will stay in place even at max dart capacity. If it doesn't just glue it into place via the dovetail joints.