30mm Wrench – Fast Print, Reinforced Design with Less Material
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
30mm wrench with internal reinforcements. Fast print, low material, strong grip. Designed for faucet (tap) disassembly.
- Rating
- 5 / 5
- Likes
- 11
- Downloads
- 64
- Makes
- 2
- Views
- 186
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Tools
- License
- Creative Commons — Attribution
This is a 30mm wrench designed for general moderate-duty use, including tasks like faucet (tap) disassembly.
The actual tool size is 30.25mm to provide a bit of tolerance for easier fitting on slightly corroded or tight nuts.
If you need a different size, you can scale the model in your slicer accordingly.
The design includes internal reinforcement voids near high-stress zones, offering good mechanical strength with faster print time and lower filament use.
Strength can be adjusted by increasing the number of wall loops and top/bottom layers—high infill isn’t necessary.
I printed mine in PLA with 4 wall loops, 15% infill, and it performed well where an adjustable metal wrench slipped.
One tool require ~12g of filament and 15min printing time.
A stronger, reinforced version is also available for tougher jobs.
🛠 Tips for faucets stuck nuts:
Fill with vinegar to dissolve mineral buildup.
Then you can add WD-40 to loosen the nut.
Hold the spinning faucet body with an old bike inner tube to avoid damage.
This is a quick-to-print, material-efficient tool that’s stronger than it looks!
