1 / 6
30mm Wrench – Fast Print, Reinforced Design with Less Material — zdjęcie 1
1 / 6

30mm Wrench – Fast Print, Reinforced Design with Less Material

Zamów wydruk tego modelu

Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.

Zapisane na tym urządzeniu.

30mm wrench with internal reinforcements. Fast print, low material, strong grip. Designed for faucet (tap) disassembly.

Ocena
5 / 5
Polubienia
11
Pobrania
64
Wydruki
2
Wyświetlenia
185
Oceny
2

Aktualizacja u źródła:

Informacje o modelu

Źródło
Printables
Kategoria
Tools
Licencja
Creative Commons — Attribution

This is a 30mm wrench designed for general moderate-duty use, including tasks like faucet (tap) disassembly.

 

The actual tool size is 30.25mm to provide a bit of tolerance for easier fitting on slightly corroded or tight nuts.
If you need a different size, you can scale the model in your slicer accordingly.

The design includes internal reinforcement voids near high-stress zones, offering good mechanical strength with faster print time and lower filament use.
Strength can be adjusted by increasing the number of wall loops and top/bottom layers—high infill isn’t necessary.

I printed mine in PLA with 4 wall loops, 15% infill, and it performed well where an adjustable metal wrench slipped.

One tool require ~12g of filament and 15min printing time.
 

A stronger, reinforced version is also available for tougher jobs.

🛠 Tips for faucets stuck nuts:

Fill with vinegar to dissolve mineral buildup.

Then you can add WD-40 to loosen the nut.

Hold the spinning faucet body with an old bike inner tube to avoid damage.


 

This is a quick-to-print, material-efficient tool that’s stronger than it looks!

 

Tagi