1 / 5
100mm/4" Exhaust for Prusa Core One
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
100mm/4" Exhaust for the Prusa Core one - Attached with Magnets
- Rating
- 4 / 5
- Likes
- 40
- Downloads
- 123
- Makes
- 3
- Views
- 903
- Reviews
- 2
Updated at source:
Model information
- Source
- Printables
- Category
- Prusa Parts & Upgrades
- License
- Creative Commons — Attribution — Noncommercial
Using the baseplate I previously uploaded (https://www.printables.com/model/1266375-base-plate-for-prusa-core-one-exhaust) I created this exhaust for the Prusa Core One. It supports a 100mm/4" hose. It uses magnets to attach to the printer and has guide pockets for alignments.
STEP file included so you can create your own modifications.
Printing
It needs supports when printing and I found printing it upsidedown and using organic/tree supports meant it resulted in faster prints.
Hardware needed
- M3x8mm SHCS -4pcs
- 6x3mm round magnets - 6pcs
- 5mm(wide) x 2mm(thick) self-adhesive EVA tape