1 / 1
IKEA Trofast long rail
Order a print of this model
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
A rail for longer IKEA trofast furniture.
- Rating
- 0 / 5
- Likes
- 0
- Downloads
- 27
- Makes
- 1
- Views
- 201
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Living Room
- License
- Creative Commons — Attribution — Noncommercial — NoDerivatives
You need a large printer to be able to print this. A 350mm Voron V2.4 is barely able to print it. With some juggling around you can print 16 at a time though.
If you do not print this anglede upright, the result will be a weak model that may break under load. I attached a 3mf file that prints 5 at a time. Because you have print this angled upright, the time it take to print one is very high. On my printer printing a single one takes 3 hours this way and laying down flat on the build plate, it takes only 1 hour.
Each sample will cost you about 100 gr of PLA.