1 / 1
IKEA Trofast long rail
Zamów wydruk tego modelu
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Living Room
- Licencja
- Creative Commons — Attribution — Noncommercial — NoDerivatives
You need a large printer to be able to print this. A 350mm Voron V2.4 is barely able to print it. With some juggling around you can print 16 at a time though.
If you do not print this anglede upright, the result will be a weak model that may break under load. I attached a 3mf file that prints 5 at a time. Because you have print this angled upright, the time it take to print one is very high. On my printer printing a single one takes 3 hours this way and laying down flat on the build plate, it takes only 1 hour.
Each sample will cost you about 100 gr of PLA.