Stryker 2.0 Asymmetrical Talon Mag Adaptor

I designed this magazine adaptor using a 3D scan of the Dart Zone Max Stryker 2.0 so the shape of it better follows the rest of the blaster.  It is also shorter, and has much bigger flair to the magazine well including opening up one side.

For print settings I recommend painting supports on the underside of the two cylindrical lugs on the ends; the rest should be self-supporting or bridge easily.  The tolerances are pretty loose and layer height shouldn't matter much; the print shown was with a 0.6mm nozzle with 0.2mm layer height, but I also printed it at 0.4mm layer height just fine.