MS-01 Fan Panel With Feet
We calculate the final price from your selected file. You review and accept it before payment.
Saved on this device.
Replacement panel for MS-01 mini PC with feet, supporting slim 120mm fans
- Rating
- 0 / 5
- Likes
- 6
- Downloads
- 120
- Makes
- 0
- Views
- 768
- Reviews
- 0
Updated at source:
Model information
- Source
- Printables
- Category
- Computers
- License
- Creative Commons — Attribution
Loved this panel option from some3duser, but really wanted to be able to use this laying flat rather than standing up. I also wanted to use an existing 15mm thick Noctua 120mm slim fan, and for it to blend in to my office space.
Fan Setup:
I ran the fan cable into the chassis, and replaced the standard fan header plug with the internal JWST connector/cable. Thanks to eskeyo on Thingiverse for the MB header pinout:
Red 5v+, Blue PWM, Black GND, Yellow Tach(FG?)
My 12v fan spins fine, though you may want a 5v optimized model for better airflow. Adjusting temp/fan speed thresholds in the BIOS has given decent cooling performance.
Included Files:
Files include the original slim fan design, an adjusted design to accommodate standard 25mm thick 120mm fans, and a Blender file set up to allow for easy modification of dimensions and elements.
Notes:
This has been tested as a v1, and required modifications that have been implemented (but not tested) in v2. All major dimensions are unchanged, so should work the same as mine.