MS-01 Fan Panel With Feet
Obliczymy ostateczną cenę na podstawie wybranego pliku. Sprawdzisz ją i zaakceptujesz przed płatnością.
Zapisane na tym urządzeniu.
Replacement panel for MS-01 mini PC with feet, supporting slim 120mm fans
- Ocena
- 0 / 5
- Polubienia
- 6
- Pobrania
- 120
- Wydruki
- 0
- Wyświetlenia
- 768
- Oceny
- 0
Aktualizacja u źródła:
Informacje o modelu
- Źródło
- Printables
- Kategoria
- Computers
- Licencja
- Creative Commons — Attribution
Loved this panel option from some3duser, but really wanted to be able to use this laying flat rather than standing up. I also wanted to use an existing 15mm thick Noctua 120mm slim fan, and for it to blend in to my office space.
Fan Setup:
I ran the fan cable into the chassis, and replaced the standard fan header plug with the internal JWST connector/cable. Thanks to eskeyo on Thingiverse for the MB header pinout:
Red 5v+, Blue PWM, Black GND, Yellow Tach(FG?)
My 12v fan spins fine, though you may want a 5v optimized model for better airflow. Adjusting temp/fan speed thresholds in the BIOS has given decent cooling performance.
Included Files:
Files include the original slim fan design, an adjusted design to accommodate standard 25mm thick 120mm fans, and a Blender file set up to allow for easy modification of dimensions and elements.
Notes:
This has been tested as a v1, and required modifications that have been implemented (but not tested) in v2. All major dimensions are unchanged, so should work the same as mine.